CUSTOMER DRAWING
L
E
J
(2 PLC)
C
B
A
4
2
3
1
END CAP
COLOR CODE
(BOTH ENDS)
WIRE
RANGE
L 1.0
(0.040)
A 0.5
(0.020)
B 0.25
(0.010)
C 0.5
(0.020)
E 0.25
(0.010)
J 0.50
(0.020)
PART NUMBER
36.8
(1.450)
37.7
(1.484)
37.7
4.2
(0.165)
5.1
(0.200)
5.9
2.0
(0.080)
2.9
(0.115)
3.8
3.7
(0.145)
4.5
(0.175)
5.2
12.1
(0.475)
14.3
(0.565)
14.3
12.7
(0.500)
11.8
(0.464)
11.8
D-436-36-COLD
D-436-37-COLD
D-436-38-COLD
26-24-22-20
18-16
RED
BLUE
14-12
YELLOW
(1.484)
(0.235)
(0.150)
(0.205)
(0.565)
(0.464)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyvinylidene fluoride.
2. CRIMP:
Base Metal: Copper Alloy 101 or 102 per ASTM B-75, Annealed
Plating: Tin-plate per ASTM-B545
3. END CAPS: Thermoplastic, Color Coded (See Table)
4. GEL: Clear silicone based Gel.
APPLICATION
1. These parts are designed to provide immersion resistant in-line splices of 1 to 1 wires falling within size range listed above, and
having insulations rated for 105°C.
2. Crimp splices using a Tyco Electronics AD-1381 Crimp Tool.
3. Install Cold Crimp Splices per Tyco Electronics RPIP-1102.
4. This document takes precedence over documents reference herein.
5. Temperature range: -65C to +150C.
TITLE:
300 Constitution Dr
Menlo Park, CA
94025, U.S.A.
IMMERSION RESISTANT CRIMP SPLICE
150 DEG C, ROHS COMPLIANT
COLD APPLIED SPLICE
Unless otherwise specified dimensions are in
millimeters.
[Inches dimensions are shown in brackets]
DOCUMENT NO.:
Raychem
Devices
D-436-3X-COLD
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
REV:
DATE:
ROUGHNESS
IN MICRON
B
March 10, 2011
0 N/A
REVISED BY:
CAGE CODE:
ECO NUMBER:
SCALE:
SIZE:
SHEET:
UNGUYEN
06090
ECO-11-004984
NTS
A
1 of 1
© 2010-2011 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.