3.0SMCJ SERIES
3000 Watts Surface Mount
TransientVoltage Suppressor
SMC/DO-214AB
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps
from 0 volt to BV min.
ꢀ
ꢀ
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
o
260 C / 10 seconds at terminals
ꢀ
ꢀ
Plastic material used carries Underwriters
Laboratory Flammability Classification 94V-0
3000 watts peak pulse power capability with a
10 X 1000 us waveform by 0.01% duty cycle
Dimensions in inches and (millimeters)
Mechanical Data
ꢀ
ꢀ
ꢀ
ꢀ
Case: Molded plastic
Terminals: Pure tin plated lead free,
Polarity: Indicated by cathode band
Standard packaging: 16mm tape (EIA STD
RS-481)
ꢀ
Weight: 0.21gram
Maximum Ratings and Electrical Characteristics
o
Rating at 25 C ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Minimum 3000
5
Units
Watts
Watts
o
Peak Power Dissipation at TA=25 C, Tp=1ms (Note 1)
P
PK
Steady State Power Dissipation
Pd
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
Maximum Instantaneous Forward Voltage at 100.0A for
Unidirectional Only (Note 4)
I
200
Amps
FSM
V
3.5 / 5.0
Volts
F
o
Operating and Storage Temperature Range
T , T
J
-55 to + 150
O
C
STG
Notes:
1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25 C Per Fig. 2.
2
2. Mounted on 8.0mm (.013mm Thick) Copper Pads to Each Terminal.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute
Maximum.
4. VF=3.5V on 3.0SMCJ5.0 thru 3.0SMCJ90 Devices and VF=5.0V on 3.0SMCJ100 thr 3.0SMCJ170
Devices.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types 3.0SMCJ5.0 through Types 3.0SMCJ170.
2. Electrical Characteristics Apply in Both Directions.
Version: A06
- 534 -