14S_05XC2173 02.09.12 16:37 ページ 1039
Series
ICs for use with Crystal Oscillators (PLL built‐in)
ꢁCMOS
■Applications
ꢀCrystal Oscillation Modules
ꢀComputer, DSP Clocks
ꢀCommunication Equipment
ꢀVarious System Clocks
ꢁOscillation Frequency
: 10MHz ~ 25MHz
ꢁOutput Frequency : 80MHz ~ 160MHz (5.0V)
: 50MHz ~ 125MHz (3.3V)
ꢁDivider Circuit & PLL Circuit Built-In
ꢁ3-State Output
ꢁOscillation Capacitor & Oscillation Feedback
Resistor Built-In
ꢁMini Mold SOT-26 Package
■General Description
■Features
The XC2173 series are high frequency, low power consumption CMOS
ICs with built-in crystal oscillator, divider and clock multiplier PLL circuits.
Output is selectable from any one of the following values for f0 :
f0 x 5, f0 x 6, f0 x 7, f0 x 8, f0/2, f0/4, f0/8. With an oscillation capacitor &
oscillation feedback resistor built-in, a stable oscillator circuit can be put
together using only an external crystal oscillator.
Oscillation Frequency
Divider Ratio
: 10MHz ~ 25MHz
: f0/2, f0/4, f0/8
Multiplier
: f0 x 5, f0 x 6, f0 x 7, f0 x 8
: 3-State
Output
Operating Voltage Range
: 3.3V 10ꢀ and 5.0V 10ꢀ
Small Consumption Current : Stand-by function included*
By connecting an external standard clock, the above mentioned output
frequencies can be achieved.
* oscillation continues in stand-by
Ultra Small Package
: SOT-26 mini mold
■Pin Configuration
■Pin Assignment
PIN�
FUNCTION
PIN NAME
NUMBER
1
/INH
XT
Stand-by control*
Crystal Oscillator Connection (Input)
GND
1
/INH
XT
6�/XT
2
3
4
5
2�
3�
5�
VDD
VSS
Qo
VSS
4�QO
Clock Output
Power Supply
VDD
SOT-26
( TOP VIEW )
Crystal Oscillator Connection (Output)�
/ Standard Clock Input
6
/XT
* Stand-by control pin has pull-up resistor built-in.
14
■INH - B, Q0 Pin Function
Q
0
/INH
"H"
Divider/Multiplier Output
High Impedance (Stand-by)
Divider/Multiplier Output
"L"
OPEN
"H"= High Level
"L" = Low Level
1039