LZ2325A/LZ2326AR
Dual-power-supply (5 V/12 V) Operation
1/3-type CCD Area Sensors with 320 k Pixels
LZ2325A/
LZ2326AR
DESCRIPTION
PIN CONNECTIONS
The LZ2325A/LZ2326AR are 1/3-type (6.0 mm)
solid-state image sensors that consist of PN photo-
diodes and CCDs (charge-coupled devices) driven
by dual-power-supply. With approximately 320 000
pixels (542 horizontal x 582 vertical), the sensor
provides a stable high-resolution color (LZ2325A)/
B/W (LZ2326AR) normal or mirror image.
16-PIN SHRINK-PITCH WDIP
TOP VIEW
ØRS
RD
1
2
3
4
5
6
7
8
16 T1
15 OFD
14 ØTG
13 ØV2
12 ØV1
11 ØV4
10 ØV3
GND
OS
FEATURES
OD
• Number of effective pixels : 512 (H) x 582 (V)
• Number of optical black pixels
– Horizontal : 2 front and 28 rear
• Pixel pitch : 9.6 µm (H) x 6.3 µm (V)
• Mg, G, Cy, and Ye complementary color filters
(For LZ2325A)
ØH2B
ØH2
ØH1B
9
ØH1
• Low fixed-pattern noise and lag
• No burn-in and no image distortion
• Blooming suppression structure
• Built-in output amplifier
• Built-in pulse mix circuit
• Built-in overflow drain voltage circuit and reset
gate voltage circuit
(WDIP016-N-0500C)
PRECAUTIONS
• The exit pupil position of lens should be more
than 25 mm (LZ2325A)/20 mm (LZ2326AR) from
the top surface of the CCD.
• Variable electronic shutter (1/50 to 1/10 000 s)
• Normal or mirror image output available from
common output pin
• Refer to "PRECAUTIONS FOR CCD AREA
SENSORS" for details.
• Compatible with PAL standard (LZ2325A)/
CCIR standard (LZ2326AR)
• Package :
16-pin shrink-pitch WDIP [Ceramic]
(WDIP016-N-0500C)
Row space : 12.70 mm
COMPARISON TABLE
LZ2325A
PAL standard (Color)
LZ2326AR
CCIR standard (B/W)
TV standard
Characteristics
Refer to each following specification.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1