5秒后页面跳转
捷配首页

Datasheet > ISL95310WIU10Z-TK
ISL95310WIU10Z-TK PDF预览

ISL95310WIU10Z-TK

更新时间： 2024-01-10 06:45:53
品牌 Logo 应用领域
瑞萨 - RENESAS 光电二极管转换器电阻器
页数 文件大小 规格书
9页 468K
描述
Digitally Controlled Potentiometer (XDCP™); MSOP10; Temp Range: -40° to 85°C

阅读下载

获取价格

ISL95310WIU10Z-TK 技术参数

是否Rohs认证： 符合生命周期：Obsolete
零件包装代码：MSOP包装说明：TSSOP, TSSOP10,.19,20
针数：10Reach Compliance Code：compliant
ECCN代码：EAR99HTS代码：8542.39.00.01
风险等级：5.77其他特性：NONVOLATILE MEMORY
控制接口：INCREMENT/DECREMENT转换器类型：DIGITAL POTENTIOMETER
JESD-30 代码：S-PDSO-G10JESD-609代码：e3
长度：3 mm湿度敏感等级：2
功能数量：1位置数：128
端子数量：10最高工作温度：85 °C
最低工作温度：-40 °C封装主体材料：PLASTIC/EPOXY
封装代码：TSSOP封装等效代码：TSSOP10,.19,20
封装形状：SQUARE封装形式：SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度（摄氏度）：260电源：3/5,8/13.2 V
认证状态：Not Qualified电阻定律：LINEAR
最大电阻容差：20%最大电阻器端电压：13.2 V
最小电阻器端电压：座面最大高度：1.1 mm
子类别：Digital Potentiometers标称供电电压：3.3 V
表面贴装：YES技术：CMOS
标称温度系数：45 ppm/ °C温度等级：INDUSTRIAL
端子面层：Matte Tin (Sn) - annealed端子形式：GULL WING
端子节距：0.5 mm端子位置：DUAL
处于峰值回流温度下的最长时间：40标称总电阻：10000 Ω
宽度：3 mmBase Number Matches：1

ISL95310WIU10Z-TK 数据手册

 浏览型号ISL95310WIU10Z-TK的Datasheet PDF文件第2页浏览型号ISL95310WIU10Z-TK的Datasheet PDF文件第3页浏览型号ISL95310WIU10Z-TK的Datasheet PDF文件第4页浏览型号ISL95310WIU10Z-TK的Datasheet PDF文件第5页浏览型号ISL95310WIU10Z-TK的Datasheet PDF文件第6页浏览型号ISL95310WIU10Z-TK的Datasheet PDF文件第7页 
DATASHEET  
ISL95310  
FN8083  
Rev 1.00  
August 27, 2015  
Digitally Controlled Potentiometer (XDCP™), Terminal Voltage 0V to 13.2V,  
128 Taps Up/Down Interface  
The Intersil ISL95310 is a digitally controlled potentiometer  
(XDCP). The device consists of a resistor array, wiper  
Features  
• Non-volatile solid-state potentiometer  
• Up/down interface with chip select enable  
switches, a control section, and nonvolatile memory. The  
wiper position is controlled by an Up/Down interface.  
The potentiometer is implemented by a resistor array  
composed of 127 resistive elements and a wiper switching  
network. Between each element and at either end are tap  
points accessible to the wiper terminal. The wiper of each  
potentiometer has an associated volatile Wiper Counter  
Register (WR) and a non-volatile Initial Value Register (IVR)  
that can be directly written to and read by the user. The  
contents of the WR controls the position of the wiper on the  
resistor array through the switches. At power-up, the device  
recalls the contents of the default data registers to the  
corresponding WR. The position of the wiper element is  
controlled by the CS, U/D, and INC inputs. The position of  
the wiper can be stored in nonvolatile memory and then be  
recalled upon a subsequent power-up operation.  
• DCP terminal voltage, 0 to +13.2V  
• 128 wiper tap points - 0.8% resolution  
- Wiper position stored in nonvolatile memory and  
recalled on power-up  
• 127 resistive elements  
- Temperature compensated  
- Low wiper resistance 70typical @ 3.3V  
• Low power CMOS  
- Standby current, 2µA at V  
= +3.6V  
CC  
• High reliability  
- Endurance, 200,000 data changes per bit  
- Register data retention 50 years @ T 75°C  
The device can be used as a three-terminal potentiometer or  
as a two-terminal variable resistor in a wide variety of  
applications including:  
• R values = 10k50k  
TOTAL  
• 10-lead MSOP package  
- Pb-free plus anneal available (RoHS compliant)  
• LCD contrast control  
Pinout  
• Parameter and bias adjustments  
• Mechanical potentiometer replacement  
• Industrial and automotive control  
ISL95310  
(10 LD MSOP)  
TOP VIEW  
1
2
3
4
5
INC  
V+  
U/D  
10  
9
Ordering Information  
GND  
RESISTANCE TEMP  
PACKAGE  
(RoHS  
Compliant)  
V
8
7
6
R
L
CC  
OPTION  
RANGE  
(°C)  
PART NUMBER  
()  
R
CS  
NC  
W
R
H
ISL95310WIU10Z  
10K  
-40 to +85 10 Ld MSOP  
(See Note) (No longer  
available, recommended  
replacement:  
ISL95310UIU10Z-TK)  
ISL95310UIU10Z  
(See Note)  
50K  
-40 to +85 10 Ld MSOP  
Add “-TK” suffix for tape and reel.  
NOTE: Intersil Pb-free plus anneal products employ special Pb-free  
material sets; molding compounds/die attach materials and 100%  
matte tin plate termination finish, which are RoHS compliant and  
compatible with both SnPb and Pb-free soldering operations. Intersil  
Pb-free products are MSL classified at Pb-free peak reflow  
temperatures that meet or exceed the Pb-free requirements of  
IPC/JEDEC J STD-020.  
FN8083 Rev 1.00  
August 27, 2015  
Page 1 of 9  
 
1234567...9

下载PDF

与ISL95310WIU10Z-TK相关器件

型号 品牌 描述 获取价格 数据表
ISL95311 INTERSIL Terminal Voltage 0V to 13.2V, 128 Taps I2C Interface

获取价格
ISL95311UIU10Z RENESAS Digitally Controlled Potentiometer (XDCP™); MSOP10; Temp Range: -40° to

获取价格
ISL95311UIU10Z INTERSIL Terminal Voltage 0V to 13.2V, 128 Taps I2C Interface

获取价格
ISL95311UIU10Z-T RENESAS 50K DIGITAL POTENTIOMETER, 2-WIRE SERIAL CONTROL INTERFACE, 128 POSITIONS, PDSO10, LEAD FR

获取价格
ISL95311UIU10Z-TK RENESAS Digitally Controlled Potentiometer (XDCP™); MSOP10; Temp Range: -40° to

获取价格
ISL95311WIU10Z INTERSIL Terminal Voltage 0V to 13.2V, 128 Taps I2C Interface

获取价格

与ISL95310WIU10Z-TK相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证