5秒后页面跳转
SC16C550IN40 PDF预览

SC16C550IN40

更新时间: 2024-02-21 16:28:05
品牌 Logo 应用领域
恩智浦 - NXP 解码器微控制器和处理器串行IO控制器通信控制器外围集成电路光电二极管先进先出芯片编码器数据传输时钟
页数 文件大小 规格书
52页 590K
描述
Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder

SC16C550IN40 技术参数

是否Rohs认证: 符合生命周期:Transferred
包装说明:DIP, DIP40,.6Reach Compliance Code:unknown
风险等级:5.75JESD-30 代码:R-PDIP-T40
JESD-609代码:e3端子数量:40
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:DIP
封装等效代码:DIP40,.6封装形状:RECTANGULAR
封装形式:IN-LINE电源:3.3/5 V
认证状态:Not Qualified子类别:Serial IO/Communication Controllers
表面贴装:NO技术:CMOS
温度等级:INDUSTRIAL端子面层:Matte Tin (Sn)
端子形式:THROUGH-HOLE端子节距:2.54 mm
端子位置:DUALuPs/uCs/外围集成电路类型:SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Base Number Matches:1

SC16C550IN40 数据手册

 浏览型号SC16C550IN40的Datasheet PDF文件第2页浏览型号SC16C550IN40的Datasheet PDF文件第3页浏览型号SC16C550IN40的Datasheet PDF文件第4页浏览型号SC16C550IN40的Datasheet PDF文件第5页浏览型号SC16C550IN40的Datasheet PDF文件第6页浏览型号SC16C550IN40的Datasheet PDF文件第7页 
SC16C550  
Universal Asynchronous Receiver/Transmitter (UART)  
with 16-byte FIFO and infrared (IrDA) encoder/decoder  
Rev. 05 — 19 June 2003  
Product data  
1. General description  
The SC16C550 is a Universal Asynchronous Receiver and Transmitter (UART) used  
for serial data communications. Its principal function is to convert parallel data into  
serial data, and vice versa. The UART can handle serial data rates up to 3 Mbits/s.  
The SC16C550 is pin compatible with the ST16C550, TL16C550 and PC16C550,  
and it will power-up to be functionally equivalent to the 16C450. Programming of  
control registers enables the added features of the SC16C550. Some of these added  
features are the 16-byte receive and transmit FIFOs, automatic hardware or software  
flow control and Infrared encoding/decoding. The selectable auto-flow control feature  
significantly reduces software overload and increases system efficiency while in FIFO  
mode by automatically controlling serial data flow using RTS output and CTS input  
signals. The SC16C550 also provides DMA mode data transfers through FIFO trigger  
levels and the TXRDY and RXRDY signals. On-board status registers provide the  
user with error indications, operational status, and modem interface control. System  
interrupts may be tailored to meet user requirements. An internal loop-back capability  
allows on-board diagnostics.  
The SC16C550 operates at 5 V, 3.3 V and 2.5 V, and the Industrial temperature  
range, and is available in plastic DIP40, PLCC44 and LQFP48 packages.  
2. Features  
5 V, 3.3 V and 2.5 V operation  
Industrial temperature range  
After reset, all registers are identical to the typical 16C450 register set  
Capable of running with all existing generic 16C450 software  
Pin compatibility with the industry-standard ST16C450/550, TL16C450/550,  
PC16C450/550  
Up to 3 Mbits/s transmit/receive operation at 5 V, 2 Mbits/s at 3.3 V, and  
1 Mbit/s at 2.5 V  
16 byte transmit FIFO  
16 byte receive FIFO with error flags  
Programmable auto-RTS and auto-CTS  
In auto-CTS mode, CTS controls transmitter  
In auto-RTS mode, RxFIFO contents and threshold control RTS  
Automatic software/hardware flow control  
Programmable Xon/Xoff characters  
Software selectable Baud Rate Generator  
Four selectable Receive FIFO interrupt trigger levels  

与SC16C550IN40相关器件

型号 品牌 描述 获取价格 数据表
SC16C554 NXP Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder

获取价格

SC16C554B NXP 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

获取价格

SC16C554B_10 NXP 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

获取价格

SC16C554BIB64 NXP 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

获取价格

SC16C554BIB64,128 NXP SC16C554B/554DB - 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs QFP 6

获取价格

SC16C554BIB64,151 NXP SC16C554B/554DB - 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs QFP 6

获取价格