5秒后页面跳转
NE58633BS,115 PDF预览

NE58633BS,115

更新时间: 2024-02-27 03:52:42
品牌 Logo 应用领域
恩智浦 - NXP 放大器商用集成电路
页数 文件大小 规格书
27页 293K
描述
NE58633BS

NE58633BS,115 技术参数

是否Rohs认证: 符合生命周期:Obsolete
零件包装代码:QFN包装说明:HVQCCN, LCC32,.2SQ,20
针数:32Reach Compliance Code:unknown
ECCN代码:EAR99HTS代码:8542.33.00.01
风险等级:5.83标称带宽:20 kHz
商用集成电路类型:AUDIO AMPLIFIER增益:25 dB
JESD-30 代码:S-PQCC-N32JESD-609代码:e4
长度:5 mm湿度敏感等级:1
信道数量:2功能数量:1
端子数量:32最高工作温度:70 °C
最低工作温度:标称输出功率:0.04 W
封装主体材料:PLASTIC/EPOXY封装代码:HVQCCN
封装等效代码:LCC32,.2SQ,20封装形状:SQUARE
封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度(摄氏度):260
电源:1.2/1.5 V认证状态:Not Qualified
座面最大高度:1 mm子类别:Audio/Video Amplifiers
最大压摆率:11 mA最大供电电压 (Vsup):1.7 V
最小供电电压 (Vsup):0.9 V表面贴装:YES
温度等级:COMMERCIAL端子面层:NICKEL PALLADIUM GOLD
端子形式:NO LEAD端子节距:0.5 mm
端子位置:QUAD处于峰值回流温度下的最长时间:40
宽度:5 mmBase Number Matches:1

NE58633BS,115 数据手册

 浏览型号NE58633BS,115的Datasheet PDF文件第2页浏览型号NE58633BS,115的Datasheet PDF文件第3页浏览型号NE58633BS,115的Datasheet PDF文件第4页浏览型号NE58633BS,115的Datasheet PDF文件第5页浏览型号NE58633BS,115的Datasheet PDF文件第6页浏览型号NE58633BS,115的Datasheet PDF文件第7页 
NE58633  
Noise reduction class-D headphone driver amplifier  
Rev. 03 — 19 January 2010  
Product data sheet  
1. General description  
The NE58633 is a stereo, noise reduction, class-D, Bridge-Tied Load (BTL) headphone  
driver amplifier. Each channel comprises a class-D BTL headphone driver amplifier, an  
electret microphone low noise preamplifier, feedback noise reduction circuit and a music  
amplifier input.  
The NE58633 operates with a battery voltage of 0.9 V to 1.7 V. The chip employs an  
on-chip DC-to-DC boost converter and internal Vref voltage reference which is filtered and  
output to ground for noise decoupling. It features mute control and plop and click  
reduction circuitry. The gain of the microphone amplifier and filter amplifier is set using  
external resistors. Differential architecture provides increased immunity to noise.  
The NE58633 is capable of driving 800 mVrms across a 16 Ω or 32 Ω load and provides  
ElectroStatic Discharge (ESD) and short-circuit protection.  
It is available in the 32-pin HVQFN32 (5 mm × 5 mm × 0.85 mm) package suitable for  
high density small-scale layouts and is an ideal choice for noise reduction headphones  
and educational audio aids.  
2. Features  
„ Low current consumption of 4.4 mA  
„ 0.9 V to 1.7 V battery operating voltage range  
„ 1 % THD+N at VO = 1 VM driving 16 Ω with a battery voltage of 1.5 V  
„ 10 % THD+N at 800 mVrms output voltage driving 16 Ω and 32 Ω loads with a battery  
voltage of 1.5 V  
„ Output noise voltage with noise reduction circuit typically 31 mVrms for Gv(cl) = 25 dB  
„ On-chip mute function  
„ Plop and click reduction circuitry  
„ Class-D BTL differential output configuration  
„ Electret microphone noise reduction polarization amplifier with external gain  
adjustment using resistors  
„ Music and filter amplifier with external gain adjustment using resistors  
„ DC-to-DC converter circuitry (3 V output) with 2.5 mA (typical) load current  
„ Internal voltage reference pinned out for noise decoupling  
„ Available in HVQFN32 package  
 
 

与NE58633BS,115相关器件

型号 品牌 描述 获取价格 数据表
NE587 NXP LED decoder/driver

获取价格

NE587D NXP LED decoder/driver

获取价格

NE587D-T ETC LED Display Driver

获取价格

NE587N NXP LED decoder/driver

获取价格

NE589D NXP IC LED DISPLAY DRIVER, PDSO20, PLASTIC, SOL-20, Display Driver

获取价格

NE589D-T PHILIPS Display Driver, 7-Segment, BIPolar, PDSO20,

获取价格