Freescale Semiconductor, Inc.
Data Sheet: Technical Data
Document Number: KL15P80M48SF0
Rev 5 08/2014
Kinetis KL15 Sub-Family
MKL15ZxxVFM4
MKL15ZxxVFT4
MKL15ZxxVLH4
MKL15ZxxVLK4
48 MHz Cortex-M0+ Based Microcontroller
Designed with efficiency in mind. Compatible with all other
Kinetis L families as well as Kinetis K1x family. General purpose
MCU featuring market leading ultra low-power to provide
developers an appropriate entry-level 32-bit solution.
This product offers:
• Run power consumption down to 47 μA/MHz in very low
power run mode
32-pin QFN (FM)
5 x 5 x 1 Pitch 0.5 mm 7 x 7 x 1 Pitch 0.5 mm
48-pin QFN (FT)
• Static power consumption down to 2 μA with full state
retention and 4 μs wakeup
• Ultra-efficient Cortex-M0+ processor running up to 48MHz
with industry leading throughput
• Memory option is up to 128 KB flash and 16 KB RAM
• Energy-saving architecture is optimized for low power with
90 nm TFS technology, clock and power gating techniques,
and zero wait state flash memory controller
64-pin LQFP (LH)
10 x 10 x 1.4 Pitch 0.5 12 x 12 x 1.4 Pitch 0.5
mm mm
80-pin LQFP (LK)
Performance
• 48 MHz ARM® Cortex®-M0+ core
Human-machine interface
• Low-power hardware touch sensor interface (TSI)
• Up to 70 general-purpose input/output (GPIO)
Memories and memory interfaces
• Up to 128 KB program flash memory
• Up to 16 KB SRAM
Communication interfaces
• Two 8-bit SPI modules
• One low power UART module
• Two UART modules
System peripherals
• Nine low-power modes to provide power optimization
based on application requirements
• COP Software watchdog
• Two I2C module
Analog Modules
• 4-channel DMA controller, supporting up to 63 request
sources
• Low-leakage wakeup unit
• SWD debug interface and Micro Trace Buffer
• Bit Manipulation Engine
• 16-bit SAR ADC
• 12-bit DAC
• Analog comparator (CMP) containing a 6-bit DAC
and programmable reference input
Timers
Clocks
• Six channel Timer/PWM (TPM)
• Two 2-channel Timer/PWM modules
• Periodic interrupt timers
• 16-bit low-power timer (LPTMR)
• Real time clock
• 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator
• Multi-purpose clock source
• 1 kHz LPO clock
Operating Characteristics
• Voltage range: 1.71 to 3.6 V
Security and integrity modules
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): -40 to 105°C
• 80-bit unique identification number per chip
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. © 2012–2014 Freescale
Semiconductor, Inc. All rights reserved.
5秒后页面跳转
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
国产PoE供电芯片选型替代指南，你想要的都在这里！
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
