Datasheet > 信号电路 > 复用器或开关> 74HC4851D-Q100

74HC4851D-Q100

更新时间： 2024-02-20 12:47:35

品牌	Logo	应用领域
恩智浦 - NXP		复用器开关复用器或开关信号电路光电二极管
页数	文件大小	规格书
21页	260K
描述
8-channel analog multiplexer/demultiplexer with injection-current effect control

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

74HC4851D-Q100 技术参数

是否Rohs认证：	符合	生命周期：	Active
包装说明：	SOP,	Reach Compliance Code：	compliant
HTS代码：	8542.39.00.01	风险等级：	5.64
模拟集成电路 - 其他类型：	SINGLE-ENDED MULTIPLEXER	JESD-30 代码：	R-PDSO-G16
JESD-609代码：	e4	长度：	9.9 mm
湿度敏感等级：	1	信道数量：	8
功能数量：	1	端子数量：	16
通态电阻匹配规范：	2 Ω	最大通态电阻 (Ron)：	330 Ω
最高工作温度：	125 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	SOP
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE
峰值回流温度（摄氏度）：	NOT SPECIFIED	座面最大高度：	1.75 mm
最大供电电压 (Vsup)：	6 V	最小供电电压 (Vsup)：	2 V
标称供电电压 (Vsup)：	3 V	表面贴装：	YES
最长断开时间：	115 ns	最长接通时间：	115 ns
技术：	CMOS	温度等级：	AUTOMOTIVE
端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)	端子形式：	GULL WING
端子节距：	1.27 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	3.9 mm
Base Number Matches：	1

74HC4851D-Q100 数据手册

74HC4851-Q100; 74HCT4851-Q100

8-channel analog multiplexer/demultiplexer with

injection-current effect control

Rev. 1 — 2 August 2012

Product data sheet

1. General description

The 74HC4851-Q100; 74HCT4851-Q100 are high-speed Si-gate CMOS devices and are

specified in compliance with JEDEC standard no. 7A.

The 74HC4851-Q100; 74HCT4851-Q100 are 8-channel analog

multiplexers/demultiplexers with three digital select inputs (S0 to S2), an active-LOW

enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output

(Z). The devices feature injection-current effect control, which has excellent value in

automotive applications where voltages in excess of the supply voltage are common.

With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2.

With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 to S2.

The injection-current effect control allows signals at disabled analog input channels to

exceed the supply voltage without affecting the signal of the enabled analog channel.

This eliminates the need for external diode/resistor networks typically used to keep the

analog channel signals within the supply-voltage range.

This product has been qualified to the Automotive Electronics Council (AEC) standard

Q100 (Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

 Automotive product qualification in accordance with AEC-Q100 (Grade 1)

 Specified from 40 C to +85 C and from 40 C to +125 C

 Injection-current cross coupling < 1 mV/mA

 Wide supply voltage range from 2.0 V to 6.0 V for 74HC4851-Q100

 ESD protection:

 MIL-STD-883, method 3015 exceeds 2000 V

 HBM JESD22-A114F exceeds 2000 V

 MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )

 Latch-up performance exceeds 100 mA per JESD 78 Class II level A

 Low ON-state resistance:

 400  (typical) at V_CC= 2.0 V

 215  (typical) at V_CC= 3.0 V

 120  (typical) at V_CC= 3.3 V

 76  (typical) at V_CC= 4.5 V

 59  (typical) at V_CC= 6.0 V

12 3 4 5 6 7...21

下载PDF

与74HC4851D-Q100相关器件

型号	品牌	描述	获取价格	数据表
74HC4851D-Q100,118	NXP	74HC(T)4851-Q100 - 8-channel analog multiplexer/demultiplexer with injection-current effec	获取价格
74HC4851D-T	NXP	暂无描述	获取价格
74HC4851PW	NXP	8-channel analog multiplexer/demultiplexer with injection-current effect control	获取价格
74HC4851PW	NEXPERIA	8-channel analog multiplexer/demultiplexer wi	获取价格
74HC4851PW,112	NXP	74HC(T)4851 - 8-channel analog multiplexer/demultiplexer with injection-current effect con	获取价格
74HC4851PW-Q100	NEXPERIA	8-channel analog multiplexer/demultiplexer wi	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

74HC4851D-Q100

74HC4851D-Q100 技术参数

74HC4851D-Q100 数据手册

与74HC4851D-Q100相关器件

与74HC4851D-Q100相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

74HC4851D-Q100

74HC4851D-Q100 技术参数

74HC4851D-Q100 数据手册

与74HC4851D-Q100相关器件

与74HC4851D-Q100相关文章

您还可以找

您在本页遇到什么问题？