5秒后页面跳转
74HC4052D-T PDF预览

74HC4052D-T

更新时间: 2024-02-23 11:21:39
品牌 Logo 应用领域
恩智浦 - NXP 解复用器开关复用器或开关信号电路光电二极管
页数 文件大小 规格书
28页 257K
描述
Dual 4-channel analog multiplexer/demultiplexer

74HC4052D-T 技术参数

Source Url Status Check Date:2013-06-14 00:00:00是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:TSSOP
包装说明:TSSOP, TSSOP16,.25针数:16
Reach Compliance Code:unknownHTS代码:8542.39.00.01
风险等级:5.03模拟集成电路 - 其他类型:DIFFERENTIAL MULTIPLEXER
JESD-30 代码:R-PDSO-G16JESD-609代码:e4
长度:5 mm湿度敏感等级:1
负电源电压最大值(Vsup):-5 V负电源电压最小值(Vsup):-1 V
标称负供电电压 (Vsup):-4.5 V信道数量:4
功能数量:1端子数量:16
标称断态隔离度:50 dB通态电阻匹配规范:6 Ω
最大通态电阻 (Ron):195 Ω最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:TSSOP封装等效代码:TSSOP16,.25
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度(摄氏度):260电源:2/6 V
认证状态:Not Qualified座面最大高度:1.1 mm
最大信号电流:0.025 A子类别:Multiplexer or Switches
最大供电电流 (Isup):0.32 mA最大供电电压 (Vsup):5 V
最小供电电压 (Vsup):1 V标称供电电压 (Vsup):4.5 V
表面贴装:YES最长断开时间:57 ns
最长接通时间:69 ns切换:BREAK-BEFORE-MAKE
技术:CMOS温度等级:AUTOMOTIVE
端子面层:NICKEL PALLADIUM GOLD端子形式:GULL WING
端子节距:0.65 mm端子位置:DUAL
处于峰值回流温度下的最长时间:30宽度:4.4 mm
Base Number Matches:1

74HC4052D-T 数据手册

 浏览型号74HC4052D-T的Datasheet PDF文件第2页浏览型号74HC4052D-T的Datasheet PDF文件第3页浏览型号74HC4052D-T的Datasheet PDF文件第4页浏览型号74HC4052D-T的Datasheet PDF文件第5页浏览型号74HC4052D-T的Datasheet PDF文件第6页浏览型号74HC4052D-T的Datasheet PDF文件第7页 
74HC4052; 74HCT4052  
Dual 4-channel analog multiplexer/demultiplexer  
Rev. 8 — 11 May 2011  
Product data sheet  
1. General description  
The 74HC4052; 74HCT4052 is a high-speed Si-gate CMOS device and is pin compatible  
with the HEF4052B. The device is specified in compliance with JEDEC standard no. 7A.  
The 74HC4052; 74HCT4052 is a dual 4-channel analog multiplexer/demultiplexer with  
common select logic. Each multiplexer has four independent inputs/outputs (pins nY0 to  
nY3) and a common input/output (pin nZ). The common channel select logics include two  
digital select inputs (pins S0 and S1) and an active LOW enable input (pin E). When  
pin E = LOW, one of the four switches is selected (low-impedance ON-state) with pins S0  
and S1. When pin E = HIGH, all switches are in the high-impedance OFF-state,  
independent of pins S0 and S1.  
VCC and GND are the supply voltage pins for the digital control inputs (pins S0, S1 and E).  
The VCC to GND ranges are 2.0 V to 10.0 V for the 74HC4052 and 4.5 V to 5.5 V for the  
74HCT4052. The analog inputs/outputs (pins nY0 to nY3 and nZ) can swing between VCC  
as a positive limit and VEE as a negative limit. VCC VEE may not exceed 10.0 V.  
For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically  
ground).  
2. Features and benefits  
„ Wide analog input voltage range from 5 V to +5 V  
„ Low ON resistance:  
‹ 80 Ω (typical) at VCC VEE = 4.5 V  
‹ 70 Ω (typical) at VCC VEE = 6.0 V  
‹ 60 Ω (typical) at VCC VEE = 9.0 V  
„ Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals  
„ Typical ‘break before make’ built-in  
„ Complies with JEDEC standard no. 7A  
„ ESD protection:  
‹ HBM JESD22-A114F exceeds 2000 V  
‹ MM JESD22-A115-A exceeds 200 V  
„ Specified from 40 °C to +85 °C and 40 °C to +125 °C  
3. Applications  
„ Analog multiplexing and demultiplexing  
„ Digital multiplexing and demultiplexing  
„ Signal gating  

与74HC4052D-T相关器件

型号 品牌 描述 获取价格 数据表
74HC4052FT TOSHIBA Dual SP4T(1:4)/Analog Multiplexer, TSSOP16B

获取价格

74HC4052N NXP Dual 4-channel analog multiplexer, demultiplexer

获取价格

74HC4052N,652 NXP 74HC(T)4052 - Dual 4-channel analog multiplexer/demultiplexer DIP 16-Pin

获取价格

74HC4052NB NXP IC 4-CHANNEL, DIFFERENTIAL MULTIPLEXER, PDIP16, Multiplexer or Switch

获取价格

74HC4052PW PHILIPS Differential Multiplexer, 1 Func, 4 Channel, CMOS, PDSO16

获取价格

74HC4052PW NXP Dual 4-channel analog multiplexer, demultiplexer

获取价格