4. SPECIFICATIONS FOR EACH SERIES
Conductive polymer type
Large capacitance, low ESR
SEPCSeries
This is an even lower ESR series based on our SEP series. Suitable for
use with motherboards, servers, VGA, etc.
Lead free-flow is supported.
Marking
(Purple)
: Polarity( ), Rated voltage, Rated Capacitance
SANYO, OS-CON, Lot.No. SEPC.
■Specifications
Conditions
Items
Characteristics
-55°C to +105°C
Category temperature range
Tolerance on rated capacitance
Tangent of loss angle
M : ±20%
120Hz
120Hz
After 2 minutes
Less than or equal to the value of Table3
Less than or equal to the value of Table3
Less than or equal to the value of Table3
Leakage current
※1
ESR
Characteristics of impedance
ratio at high temp. and low temp.
Z / Z 20°C
Z / Z 20°C
0.75 to 1.25
0.75 to 1.25
Within ±20%
Based the value at
100KHz,+20°C
-55°C
+105°C
∆C/C
tanδ
ESR
Leakage current
1.5 times or less than an initial standard
1.5 times or less than an initial standard
Below an initial standard
105°C, 2,000h, Rated
Endurance
voltage applied
∆C/C
tanδ
ESR
Within ±20%
60°C, 90% RH,
1,000h,
No-applied voltage
1.5 times or less than an initial standard
1.5 times or less than an initial standard
Below an initial standard (after voltage processing)
Within ±5%
Damp heat (Steady state)
Leakage current
∆C/C
tanδ
ESR
Resistance to
soldering heat
Flow method
(260±5°C X 10s)
Below an initial standard
Below an initial standard
Leakage current
Below an initial standard (after voltage processing)
※1 In case of some problems for measured values, measure after applying rated voltage for 120 minutes at 105°C .
■Dimensions
E12.E13.F13 Size
E9 Size
φd
φd
(+)
(+)
15min.
19min.
15min.
19min.
4min.
4min.
L
L
E9 size flat rubber is used.
■Size List
RV : Rated voltage
(SV) : Surge (room temperature)
(unit : mm)
RV
(SV)
2.5
4.0
6.3
16.0
µF
(3.3)
(5.2)
(8.2) (18.4)
Size Code
φD+0.5max.
Lmax.
F
φd±0.05
270
470
560
680
820
E12
F13
E9
8.0
8.0
9.0
12.0
13.0
13.0
3.5±0.5
3.5±0.5
3.5±0.5
5.0±0.5
0.6
0.6
0.6
0.6
E9 ,E13
F13
E12
E13
F13
E9
E9 ,E13
F13
E9 ,E13
E13
F13
8.0
10.0
1500
2700
F13
※For the minimum packing quantity, please refer to page 51.
30