LF198

更新时间： 2024-01-11 16:08:45

品牌	Logo	应用领域
美国国家半导体 - NSC		采样保持电路
页数	文件大小	规格书
13页	523K
描述
Monolithic Sample-and-Hold Circuits

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

LF198 技术参数

是否Rohs认证：	不符合	生命周期：	Transferred
零件包装代码：	SOIC	包装说明：	CERAMIC, SOIC-14
针数：	14	Reach Compliance Code：	not_compliant
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.24	最长采集时间：	25 µs
标称采集时间：	20 µs	放大器类型：	SAMPLE AND HOLD CIRCUIT
最大模拟输入电压：	11.5 V	最小模拟输入电压：	-11.5 V
JESD-30 代码：	R-CDSO-G14	JESD-609代码：	e0
湿度敏感等级：	1	负供电电压上限：	-18 V
标称负供电电压 (Vsup)：	-15 V	功能数量：	1
端子数量：	14	最高工作温度：	125 °C
最低工作温度：	-55 °C	封装主体材料：	CERAMIC, METAL-SEALED COFIRED
封装代码：	SOP	封装等效代码：	SOP14,.4
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE
峰值回流温度（摄氏度）：	260	电源：	+-15 V
认证状态：	Not Qualified	采样并保持/跟踪并保持：	SAMPLE
筛选级别：	MIL-PRF-38535 Class V	座面最大高度：	2.58 mm
子类别：	Sample and Hold Circuits	最大压摆率：	6.5 mA
供电电压上限：	18 V	标称供电电压 (Vsup)：	15 V
表面贴装：	YES	技术：	BIPOLAR
温度等级：	MILITARY	端子面层：	Tin/Lead (Sn/Pb)
端子形式：	GULL WING	端子节距：	1.27 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	40
宽度：	6.35 mm	Base Number Matches：	1

LF198 数据手册

July 2000

LF198/LF298/LF398, LF198A/LF398A

Monolithic Sample-and-Hold Circuits

General Description

Features

n Operates from 5V to 18V supplies

n Less than 10 µs acquisition time

n TTL, PMOS, CMOS compatible logic input

n 0.5 mV typical hold step at C_h= 0.01 µF

n Low input offset

The LF198/LF298/LF398 are monolithic sample-and-hold

circuits which utilize BI-FET technology to obtain ultra-high

dc accuracy with fast acquisition of signal and low droop

rate. Operating as a unity gain follower, dc gain accuracy is

0.002% typical and acquisition time is as low as 6 µs to

0.01%. A bipolar input stage is used to achieve low offset

voltage and wide bandwidth. Input offset adjust is accom-

plished with a single pin, and does not degrade input offset

drift. The wide bandwidth allows the LF198 to be included in-

side the feedback loop of 1 MHz op amps without having sta-

bility problems. Input impedance of 10¹⁰Ω allows high

source impedances to be used without degrading accuracy.

n 0.002% gain accuracy

n Low output noise in hold mode

n Input characteristics do not change during hold mode

n High supply rejection ratio in sample or hold

n Wide bandwidth

n Space qualified, JM38510

P-channel junction FET’s are combined with bipolar devices

in the output amplifier to give droop rates as low as 5 mV/min

with a 1 µF hold capacitor. The JFET’s have much lower

noise than MOS devices used in previous designs and do

not exhibit high temperature instabilities. The overall design

guarantees no feed-through from input to output in the hold

mode, even for input signals equal to the supply voltages.

Logic inputs on the LF198 are fully differential with low input

current, allowing direct connection to TTL, PMOS, and

CMOS. Differential threshold is 1.4V. The LF198 will operate

from 5V to 18V supplies.

An “A” version is available with tightened electrical

specifications.

Typical Connection and Performance Curve

Acquisition Time

DS005692-32

DS005692-16

Functional Diagram

DS005692-1

DS005692

www.national.com

12 3 4 5 6 7...13

下载PDF

与LF198相关器件

型号	品牌	描述	获取价格	数据表
LF198/BGC	ETC	Sample/Track-and-Hold Amplifier	获取价格
LF198A	Linear	Precision Sample and Hold Amplifier	获取价格
LF198A	NSC	Monolithic Sample-and-Hold Circuits	获取价格
LF198A	TI	LF198/LF298/LF398, LF198A/LF398A Monolithic Sample-and-Hold Circuits	获取价格
LF198AH	Linear	Precision Sample and Hold Amplifier	获取价格
LF198AH	NSC	Monolithic Sample-and-Hold Circuits	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

LF198

LF198 技术参数

LF198 数据手册

与LF198相关器件

与LF198相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

LF198

LF198 技术参数

LF198 数据手册

与LF198相关器件

与LF198相关文章

您还可以找

您在本页遇到什么问题？