5秒后页面跳转
363D PDF预览

363D

更新时间: 2024-02-06 05:23:44
品牌 Logo 应用领域
美国国家半导体 - NSC 仪表放大器
页数 文件大小 规格书
22页 452K
描述
LM363 Precision Instrumentation Amplifier

363D 技术参数

生命周期:Contact ManufacturerReach Compliance Code:compliant
风险等级:5.7其他特性:MAX CONTACTS (SERIES)=40, MAX ROWS (SERIES)=1
连接器类型:BOARD CONNECTOR触点性别:MALE
DIN 符合性:NO滤波功能:NO
IEC 符合性:NOMIL 符合性:NO
混合触点:NO安装方式:RIGHT ANGLE
安装类型:BOARD选件:GENERAL PURPOSE
端子节距:2.54 mm端接类型:SOLDER
UL 易燃性代码:94V-0Base Number Matches:1

363D 数据手册

 浏览型号363D的Datasheet PDF文件第2页浏览型号363D的Datasheet PDF文件第3页浏览型号363D的Datasheet PDF文件第4页浏览型号363D的Datasheet PDF文件第5页浏览型号363D的Datasheet PDF文件第6页浏览型号363D的Datasheet PDF文件第7页 
April 1991  
LM363 Precision Instrumentation Amplifier  
General Description  
The LM363 is a monolithic true instrumentation amplifier. It  
requires no external parts for fixed gains of 10, 100 and  
1000. High precision is attained by on-chip trimming of off-  
set voltage and gain. A super-beta bipolar input stage gives  
very low input bias current and voltage noise, extremely low  
offset voltage drift, and high common-mode rejection ratio.  
A two-stage amplifier design yields an open loop gain of  
10,000,000 and a gain bandwidth product of 30 MHz, yet  
remains stable for all closed loop gains. The LM363 oper-  
eliminate bandwidth loss due to cable capacitance. Com-  
pensation pins allow overcompensation to reduce band-  
width and output noise, or to provide greater stability with  
capacitive loads. Separate output force, sense and refer-  
ence pins permit gains between 10 and 10,000 to be pro-  
grammed using external resistors.  
On the 8-pin metal can package, gain is internally set at 10,  
100 or 500 but may be increased with external resistors.  
The shield driver and offset adjust pins are omitted on the  
8-pin versions.  
g
g
18V with only  
ates with supply voltages from  
1.5 mA current drain.  
5V to  
The LM363 is rated for 0 C to 70 C.  
§
§
The LM363’s low voltage noise, low offset voltage and off-  
set voltage drift make it ideal for amplifying low-level, low-  
impedance transducers. At the same time, its low bias cur-  
rent and high input impedance (both common-mode and  
differential) provide excellent performance at high imped-  
ance levels. These features, along with its ultra-high com-  
mon-mode rejection, allow the LM363 to be used in the  
most demanding instrumentation amplifier applications, re-  
placing expensive hybrid, module or multi-chip designs. Be-  
cause the LM363 is internally trimmed, precision external  
resistors and their associated errors are eliminated.  
Features  
Y
Offset and gain pretrimmed  
e
Y
Y
Y
Y
Y
Y
Y
12 nV/ Hz input noise (G 500/1000)  
0
2 nA bias current typical  
e
130 dB CMRR typical (G 500/1000)  
No external parts required  
Dual shield drivers  
Can be used as a high performance op amp  
Low supply current (1.5 mA typ)  
The 16-pin dual-in-line package provides pin-strappable  
gains of 10, 100 or 1000. Its twin differential shield drivers  
Typical Connections  
16-Pin Package  
8-Pin Package  
e
G
10 2, 3, 4, open  
100 3–4 shorted  
000 2–4 shorted  
TL/H/560933  
TL/H/5609–1  
Connection Diagrams  
Metal Can Package  
16-Pin Dual-In-Line Package  
Order Number LM363H-10,  
LM363H-100 or LM363H-500  
See NS Package Number H08C  
TL/H/5609–2  
Order Number 363D  
See NS Package Number D16C  
C
1995 National Semiconductor Corporation  
TL/H/5609  
RRD-B30M115/Printed in U. S. A.  

与363D相关器件

型号 品牌 描述 获取价格 数据表
363HD ETC Optoelectronic

获取价格

363HRC3 EVERLIGHT Optoelectronic Device,

获取价格

363M10K HONEYWELL Trimmer, Cermet, 0.5W, 10000ohm, 10% +/-Tol, 1 Turn(s)

获取价格

363M1MEG HONEYWELL Trimmer, Cermet, 0.5W, 1000000ohm, 10% +/-Tol, 1 Turn(s)

获取价格

363P100 HONEYWELL Trimmer, Cermet, 0.5W, 100ohm, 10% +/-Tol, 1 Turn(s)

获取价格

363P100K HONEYWELL Trimmer, Cermet, 0.5W, 100000ohm, 10% +/-Tol, 1 Turn(s)

获取价格