11C91

更新时间： 2024-01-15 07:57:09

品牌	Logo	应用领域
美国国家半导体 - NSC		预分频器
页数	文件大小	规格书
10页	158K
描述
650 MHz Prescalers

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

11C91 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Obsolete	包装说明：	DIP, DIP16,.3
Reach Compliance Code：	compliant	HTS代码：	8542.39.00.01
风险等级：	5.92	JESD-30 代码：	R-XDIP-T16
JESD-609代码：	e0	逻辑集成电路类型：	PRESCALER
湿度敏感等级：	2A	端子数量：	16
最高工作温度：	125 °C	最低工作温度：	-55 °C
封装主体材料：	CERAMIC	封装代码：	DIP
封装等效代码：	DIP16,.3	封装形状：	RECTANGULAR
封装形式：	IN-LINE	峰值回流温度（摄氏度）：	250
认证状态：	Not Qualified	筛选级别：	MIL-STD-883 Class C
子类别：	Prescaler/Multivibrators	表面贴装：	NO
技术：	ECL	温度等级：	MILITARY
端子面层：	Tin/Lead (Sn/Pb)	端子形式：	THROUGH-HOLE
端子节距：	2.54 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	30	Base Number Matches：	1

11C91 数据手册

Not Intended For New Designs

August 1992

11C90/11C91

650 MHz Prescalers

General Description

The 11C90 and 11C91 are high-speed prescalers designed

specifically for communication and instrumentation applica-

tions. All discussions and examples in this data sheet are

applicable to the 11C91 as well as the 11C90.

also allows power consumption to be reduced by leaving

the separate V pin open if the TTL output is not used.

To facilitate capacitive coupling of the clock signal, a 400X

resistor (V

) is connected internally to the V reference.

REF BB

The 11C90 will divide by 10 or 11 and the 11C91 by 5 or 6,

both over a frequency range from DC to typically 650 MHz.

The division ratio is controlled by the Mode Control. The

divide-by-10 or -11 capability allows the use of pulse swal-

lowing techniques to control high-speed counting modulos

by lower-speed circuits. The 11C90 may be used with either

ECL or TTL power supplies.

Connecting this resistor to the Clock Pulse input (CP) auto-

matically centers the input about the switching threshold.

Maximum frequency operation is achieved with a 50% duty

cycle.

Each of the Mode Control inputs is connected to an internal

2 kX resistor with the other end uncommitted (RM and

RM ). An M input can be driven from a TTL circuit operating

In addition to the ECL outputs Q and Q, the 11C90 contains

an ECL-to-TTL converter and a TTL output. The TTL output

from the same V by connecting the free end of the asso-

ciated 2 kX resistor to V

. When an M input is driven

CCA

operates from the same V and V levels as the counter,

CC EE

from the ECL circuit, the 2 kX resistor can be left open or, if

but a separate pin is used for the TTL circuit V . This mini-

mizes noise coupling when the TTL output switches and

required, can be connected to V

resistor.

to act as a pull-down

Logic Symbol

Connection Diagram

16-Pin DIP

TL/F/9892–2

TL/F/9892–1

Pin Names

Description

Count Enable Input (Active LOW)

Clock Pulse Input

Count Modulus Control Input

Asynchronous Master Set Input

ECL Outputs

Q, Q

QTTL

TTL Output

2 kX Resistor to M

REF

400X Resistor to V

1995 National Semiconductor Corporation

TL/F/9892

RRD-B30M115/Printed in U. S. A.

12 3 4 5 6 7...10

下载PDF

与11C91相关器件

型号	品牌	描述	获取价格	数据表
11C91D	NSC	650 MHz Prescalers	获取价格
11C91DC	ETC	Prescaler/Frequency Divider	获取价格
11C91DCQB	FAIRCHILD	Prescaler, ECL, CDIP16,	获取价格
11C91DCQC	FAIRCHILD	Prescaler, ECL, CDIP16,	获取价格
11C91DCQR	NSC	650 MHz Prescalers	获取价格
11C91DCQR	FAIRCHILD	Prescaler, ECL, CDIP16,	获取价格