CF5020 series
High-Frequency, 3rd Overtone Crystal Oscillator Module ICs
OVERVIEW
The CF5020 series are high-frequency, 3rd overtone crystal oscillator module ICs. They incorporate an oscilla-
tor circuit and an output buffer that operate at high frequency on a single chip. The oscillator circuit employs
CMOS inverters and a built-in damping resistor R , reducing the crystal current compared with existing
D
devices. The damping resistor R is fabricated using NPC’s unique high-precision thin-film resistor technol-
D
ogy, which suppresses oscillator characteristic variations due to changes in temperature and voltage to a mini-
mum. The CF5020 series can be utilized to construct stable, high-frequency, 3rd overtone crystal oscillators.
FEATURES
ꢀ R built-in to reduce crystal current in the oscilla-
ꢀ Standby function
D
tor circuit
• High impedance in standby mode, oscillator stops
ꢀ Low standby current
ꢀ 2.25 to 3.6V operating supply voltage range
ꢀ Recommended operating frequency range
(varies with version)
• 2.5V operation: 60 to 155MHz
• 3.0V operation: 60 to 170MHz
ꢀ – 40 to 85°C operating temperature range
ꢀ Oscillator capacitors with excellent frequency
response built-in
• Power-saving pull-up resistor built-in
ꢀ Oscillation detector function
ꢀ CMOS output duty level (1/2VDD)
ꢀ 50 5% output duty (at 1/2VDD)
ꢀ 30pF output load (3.3V operation)
ꢀ Molybdenum-gate CMOS process
ꢀ Chip form (CF5020AL×)
ꢀ Feedback resistors with good temperature charac-
teristics built-in
APPLICATIONS
ꢀ Crystal oscillator modules (3rd overtone oscillation)
SERIES CONFIGURATION
Oscillator circuit constants
Standby mode
Oscillator
stop
Recommended operating
*1
INHN
input
level
frequency range [MHz]
Built-in capacitance Feedback Damping
resistance resistance
Version
Output
state
gm ratio
2.5V operation 3.0V operation
C
[pF]
C
[pF]
Rf [kΩ]
R
[Ω]
function
G
D
D
CF5020ALA
CF5020ALB
CF5020ALC
CF5020ALD
60 to 80
70 to 115
105 to 135
110 to 155
60 to 90
80 to 125
115 to 145
135 to 170
0.6
0.8
1.0
1.0
4
7
3
3
5
2.5
200
57
3
1
1
4.5
High
impedance
CMOS
Yes
3.3
57
2.2
57
*1. The recommended operating frequency is a yardstick value derived from the crystal used for NPC characteristics authentication. However, the oscilla-
tor frequency band is not guaranteed. Specifically, the characteristics can vary greatly due to crystal characteristics and mounting conditions, so the
oscillation characteristics of components must be carefully evaluated.
ORDERING INFORMATION
Device
Package
CF5020AL×–2
Chip form
NIPPON PRECISION CIRCUITS INC.—1