CF5018 series
2.5V 3rd Overtone Crystal Oscillator Module ICs
OVERVIEW
The CF5018 series are crystal oscillator ICs that operate from 2.5V. Devices are available that provide 3rd
overtone oscillation in the range 30MHz to 80MHz. They are optimized for 2.5V operation, resulting in stable
oscillator startup characteristics and output duty stability. They feature a large reduction in chip surface area
compared to existing devices, making possible the construction of small-sized crystal oscillator.
FEATURES
ꢀ 2.25 to 2.75V operating supply voltage range
ꢀ 30MHz to 80MHz oscillation frequency range
(varies with version)
ꢀ f output frequency (oscillation frequency)
O
ꢀ 8mA output drive capability (V = 2.25V)
DD
ꢀ CMOS output duty level (1/2VDD)
ꢀ 50 5% output duty (at 1/2VDD)
ꢀ 30pF output load
ꢀ Molybdenum-gate CMOS process
ꢀ Chip form (CF5018AL×)
ꢀ – 40 to 85°C operating temperature range
ꢀ Oscillation capacitors C , C built-in
G
D
ꢀ Inverter amplifier feedback resistor built-in
ꢀ Standby function
• High impedance in standby mode, oscillator stops
ꢀ Low standby current
• Power-saving pull-up resistor built-in
SERIES CONFIGURATION
Operating
supply voltage
range [V]
Built-in capacitance [pF]
Rf
Recommended operating
1
Version
gm ratio
frequency range [MHz]
[kΩ]
C
C
D
G
CF5018ALA
CF5018ALB
CF5018ALC
CF5018ALD
CF5018ALE
30 to 36
36 to 40
40 to 50
50 to 60
60 to 80
0.25
0.50
0.75
1.00
1.50
4.7
3.5
3.5
3.0
3.5
15
10
2.25 to 2.75
8
1. The recommended operating frequency is a yardstick value derived from the crystal used for NPC characteristics authentication. However, the
oscillator frequency band is not guaranteed. Specifically, the characteristics can vary greatly due to crystal characteristics and mounting condi-
tions, so the oscillation characteristics of components must be carefully evaluated.
ORDERING INFORMATION
Device
Package
CF5018AL×–2
Chip form
SEIKO NPC CORPORATION —1