5秒后页面跳转
NI1428 PDF预览

NI1428

更新时间: 2022-12-17 06:37:03
品牌 Logo 应用领域
美国国家仪器公司 - NI /
页数 文件大小 规格书
3页 55K
描述
Camera Link Image Acquisition

NI1428 数据手册

 浏览型号NI1428的Datasheet PDF文件第2页浏览型号NI1428的Datasheet PDF文件第3页 
Camera Link Image Acquisition  
NI 1428  
• High-resolution and high-speed  
image acquisition for Camera  
Link cameras  
• Simple, small cabling  
• Onboard programmable region  
of interest  
Operating Systems  
• Windows 2000/NT/XP  
Recommended Software  
• LabVIEW™  
• LabWindows/CVI™  
• Measurement Studio™  
• Vision Development Module  
• Pixel decimation and image scaling  
• Four 256 by 8-bit LUTs  
• 16 MB of onboard memory  
• 4 external triggers (digital I/O lines)  
• RTSI bus or PXI trigger bus  
synchronization with data  
acquisition, motion, and CAN  
• Camera control with LVDS  
(EIA-644) differential output  
or asynchronous serial control  
Other Compatible Software  
• C/C++  
Driver Software (included)  
• NI-IMAQ™  
Overview and Applications  
Serial Interface  
For machine vision and scientific imaging developers who need Use the serial interface on the Camera Link connector to easily  
very high-resolution digital imaging with simple cabling, the configure and control the camera with NI-IMAQ and  
National Instruments 1428 devices are for image acquisition from NI Measurement & Automation Explorer software. An NI 1428  
Camera Link cameras.  
includes a National Instruments counter/timer ASIC that generates  
real-time control signals. You can use the advanced triggering to send  
strobe pulses and pulse trains.  
Camera Link  
Camera Link is an industrial high-speed serial data and cabling  
standard developed by National Instruments, camera vendors, Synchronize Motion and Vision  
and other image acquisition companies. Created for easy Onboard trigger control and mapping circuitry route, monitor,  
connectivity between the PC and the camera, Camera Link and drive the external RTSI bus trigger lines for PCI. Using the  
provides simple, flexible cabling for high-speed, high-resolution RTSI bus, you can develop applications where motion, vision, and  
digital cameras. A Camera Link cable is a slender 26-pin cable with measurements are tightly integrated. You can use the RTSI bus to  
24-bit data, clock, and enables as well as control signals. You can route an incoming trigger on your PCI-1428 to an NI measurement  
control camera functionality by asynchronous serial control or device to synchronize data acquisition. The PXI trigger bus offers  
LVDS differential lines through a Camera Link cable. Camera Link similar features.  
offers future data rate capabilities up to 2.3 Gb/s. You can  
interchange Camera Link digital cameras from a variety of vendors NI-IMAQ and Interchangeable Cameras  
with Camera Link image acquisition hardware.  
NI-IMAQ driver software for image acquisition can scale between  
many types of cameras and acquisition methods. Using NI-IMAQ,  
you can begin by using a low-cost RS-170 camera and image  
Onboard Memory  
NI 1428 devices come with 16 MB of onboard high-speed acquisition device and then upgrade to a faster, higher-resolution  
synchronous dynamic RAM (SDRAM). You can use the onboard digital camera and acquisition device with minimal software  
memory as a FIFO buffer for high-speed image acquisition.  
changes. When using a camera, you can configure the new board and  
camera in NI Measurement & Automation Explorer and then  
immediately reuse your software. Because NI-IMAQ driver software  
uses one set of function calls, it works for a wide variety of cameras,  
and there is no need to rewrite your software.  

与NI1428相关器件

型号 品牌 描述 获取价格 数据表
NI14304000J0G AMPHENOL 暂无描述

获取价格

NI14305000J0G AMPHENOL Barrier Strip Terminal Block,

获取价格

NI14306000J0G AMPHENOL Barrier Strip Terminal Block

获取价格

NI1722 NI Smart Cameras for Embedded Machine Vision

获取价格

NI1742 NI Smart Cameras for Embedded Machine Vision

获取价格

NI1744 NI Smart Cameras for Embedded Machine Vision

获取价格