GPIB Analyzers for PCI and PCI Express
NI PCI-GPIB+, NI PCIe-GPIB+,
NI PCIe-GPIB+ Low-Profile (LP)
◾◾
Analyzer Hardware
Capture event markers for easy
analysis and benchmarking
Selective captured event printing
Software can run concurrently
with GPIB applications
◾◾
Monitor and control all GPIB lines
◾◾
◾◾
◾◾
Capture GPIB events including
event timestamping
Large FIFO for high-speed captures
◾◾
◾◾
Hardware triggering
Variable handshake rate
Capture GPIB handshake
line transitions
Controller
◾◾
◾◾
IEEE 488.2 and HS488 compatible
◾◾
◾◾
Jumperless, software configurable
◾◾
Plug-and-play compatible
Analyzer Software
Operating Systems
◾◾
Easy-to-use graphical application
◾◾
Windows Vista (32- and 64-bit)/XP/2000
◾◾
Selective GPIB event capture
Driver Software (included)
◾◾
Several windows for capture buffer
◾◾
NI-488.2
and capture display
Several data display formats
◾◾
GPIB analyzer
◾◾
◾◾
Captured data searchable
for specified GPIB pattern
the Capture button in the Action window. When the analyzer is capturing, it
Overview
continually samples the GPIB and records the occurrence of user-specified GPIB
events. You can configure the analyzer application to record captured information
for any combination of the following GPIB events:
The NI PCI-GPIB+, PCIe-GPIB+, and PCIe-GPIB+/LP devices include a complete
GPIB analyzer and GPIB controller on a single device. Compatible with HS488,
these devices are lower-cost alternatives to purchasing two separate products
for analyzer and controller functionality. You can use them to troubleshoot
IEEE 488 software and hardware problems or control GPIB instruments. You
can trigger on bus patterns or specific GPIB events and benchmark system
performance with the built-in timestamping capabilities.
◾◾
Data transfers
◾◾
Command transfers
◾◾
Control-line transition
◾◾
Handshake-line transition
◾◾
Parallel-poll response
In addition, you can configure the analyzer application to continually
reuse the capture buffer (treat it as a circular buffer) until you stop the
capture operation.
Monitoring the Bus
The GPIB analyzer software displays the current state of the GPIB at all times.
The Bus Monitor window shows the real-time state of each of the 16 GPIB
data and control lines. It displays the state of the eight data lines in ASCII,
hexadecimal, and binary formats and the state of the eight control lines in the
binary format.
You can configure the analyzer application to participate in the IEEE 488.1
three-wire handshake while capturing. For nonintrusive captures, you can
configure the analyzer application not to participate in the IEEE 488.1 three-
wire handshake while capturing. Besides capturing the standard IEEE 488.1
three-wire handshake, the analyzer application can capture high-speed HS488
data transfers. If desired, you can configure the analyzer application to record
timestamps with each captured event. Recorded timestamps have a
50 ns resolution.
The window displays the binary format as a series of LEDs, one for each GPIB
line represented.
Each GPIB data and control line has a corresponding toggle switch you can
use to assert one or more of these lines at any time. Using these switches, you
can exercise simple control over the GPIB, such as stepping through the states
of the source or acceptor handshake. The Accept Byte button performs a single
acceptor handshake sequence. The GPIB analyzer software offers several options
for capturing and analyzing activity on the GPIB. You enable the capture by using
Sometimes you may want to focus a capture operation on a specific GPIB
pattern that occurs at some unknown time. With the analyzer application, you
can define a GPIB trigger condition and select the number of events to record
5秒后页面跳转
MAX487芯片引脚图及功能、应用领域详解
IR2110驱动芯片引脚图及功能、电路图详解
74LS74是什么芯片 74LS74引脚图及功能表
CD4511芯片引脚图及功能、电路图解析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
