High-Resolution
Digital Multimeters
NI 4050, NI 4060
DC Measurements
Application Software
LabVIEW
Measurement Studio
Visual Basic
-300 VDC to +300 VDC
-10 ADC to +10 ADC
AC Measurements
0 to 300 V
Visual C ++
IVI-compliant instrument driver
rms
0 to 10 A
rms
True rms, 20 Hz to 25 kHz
Overranging
Resistance Measurements
0 to 200 MΩ
2 or 4-wire
60 readings/s, maximum
300 V isolation
Autozero (NI 4060 only)
Triggers (NI 4060 only)
Voltmeter complete output
Trigger input
Category II safety voltage rating
Designed for UL 3111
IEC1010 (CE) certified
Solutions
Electronic testing
Automated test equipment (ATE)
Field test
Production test
General purpose DMM
Portable field test
Electronic service and repair
Calibration Certificate Included
See page 256.
Overview
local sales representative for more
information regarding measurement
EXPRESS
CODES
The National Instruments NI 4050 for PCMCIA and NI 4060 for PCI and
PXI/CompactPCI instruments are full-featured digital multimeters performance in your specific application.
(DMMs) for notebooks, PCI, and PXI/CompactPCI computers.
They feature accurate 51⁄
For information or to
buy products online,
visit ni.com/catalog
and enter:
2
-digit DC voltage and current, true-rms AC Measuring Voltages
voltage and current, and resistance (ohms) measurements. The
NI 4050 for PCMCIA with its size, weight, and low-power
consumption is ideal for portable measurements and data logging
with hand-held and notebook computers. The NI 4060 DMMs
are perfectly suited for use in automated production test, portable field
test, and benchtop electronic test. When using the NI 4060
with National Instruments switching modules, such as the NI 2501,
NI 2503, SCXI-1127, SCXI-1128, or SCXI-1129, you can measure
thousands of channels, consisting of voltages, thermocouples, RTDs,
thermistors, and current loops, and keep a firm control on the cost
of your system.
The NI 4050 and NI 4060 DMMs have five
input ranges available for measuring DC
voltages: 20 mV, 200 mV, 2 V, 25 V, and
250 V. When overranging (measuring a
voltage that exceeds the chosen range),
accuracy is reduced. Five input ranges are
available for measuring AC voltages:
ni4050
ni4060
20 mV , 200 mV , 2 V , 25 V , and 250 V . The NI 4060
rms
rms
rms
rms
rms
DMMs measure AC voltages to the specified accuracy as long as the
voltage is within 10 percent of the selected input range. When
overranging, accuracy is reduced. In AC voltage ranges, the NI 4050
and NI 4060 DMMs measure the AC-coupled true-rms value of a
Hardware
signal. This method is referred to as true-rms or T . True-rms
rms
Reading Rates
capability is valuable for measuring a variety of signal waveform
shapes. AC coupling is useful for measuring a small AC signal in the
presence of a large DC offset.
NI 4050 and NI 4060 DMMs offer multiple reading rates determined
by your resolution, function, range selections, and powerline
rejection. The maximum reading rate for the NI 4050 and
and NI 4060 DMM is 60 reading/s, once the initial setup time affecting Measuring Resistance
the first reading is passed. Please contact your National Instruments The NI 4050 and NI 4060 DMMs have five basic input ranges for both
Product
Bus
Accuracy
SCXI Control
Autozero
Triggering for Scanners
4-Wire Resistance
Measurement
1
⁄
2
2
NI 4050
NI 4060
PCMCIA
PCI, PXI/CompactPCI
5
5
digit
digit
No
Yes
No
Yes
No
Yes
No
Yes
1
⁄
Table 1. NI 4050 and NI 4060 Channel, Speed, and Resolution Specifications (see page 364 for detailed specifications)
National Instruments 357
Tel: (512) 794-0100 • Fax: (512) 683-9300 • info@ni.com • ni.com