5秒后页面跳转
777459-10 PDF预览

777459-10

更新时间: 2022-12-16 16:21:06
品牌 Logo 应用领域
美国国家仪器公司 - NI /
页数 文件大小 规格书
17页 4120K
描述
SCC Configuration Guide

777459-10 数据手册

 浏览型号777459-10的Datasheet PDF文件第2页浏览型号777459-10的Datasheet PDF文件第3页浏览型号777459-10的Datasheet PDF文件第4页浏览型号777459-10的Datasheet PDF文件第5页浏览型号777459-10的Datasheet PDF文件第6页浏览型号777459-10的Datasheet PDF文件第7页 
SCC Configuration Guide  
SCC – Portable, Low-Cost  
Signal Conditioning  
• Ideal for portable measurement systems  
• Wide variety of direct signal and sensor  
connectivity options  
• Wide range of analog and digital  
conditioning options  
• Measurement type selectable  
on a per-channel basis  
• Front-end signal conditioning  
for M Series, E Series, and some  
B Series multifunction DAQ devices  
Configure Your SCC System in Six Steps  
Step 1 – Select Your SCC Modules (Table 1)  
Analog input, analog output, and digital I/O modules have dedicated  
slots. You can select up to eight noncascaded modules for analog input  
and eight modules for digital I/O. You can install feedthrough modules in  
any slot, but they are especially useful for accessing counter/timers on  
your M Series, E Series, or B Series multifunction DAQ device.  
7 to 42 VDC external power source. To indicate the power option for your  
SCC system, select 01, 02, or 03 as the last two digits of the part number  
of the SC-2345 or SC-2350 carrier.  
Please note that if you choose power option 01, it is possible to power  
your SCC system using the internal power source of your DAQ device.  
For DAQCard and DAQPad devices, the total power required by your SCC  
modules must be less than 800 mW (490 mW of analog power). For PCI  
or PXI and M Series or E Series multifunction DAQ devices, the total  
power required by your SCC modules must be less than 4.55 W (1.74 W  
for analog modules). Additional power modules are sold separately. To  
determine the power requirements of the modules in your SCC DAQ  
system, use the online SCC Advisor at ni.com/advisors.  
Step 2 – Choose an SCC Carrier (Table 2)  
SCC carriers are available either with a hinged lid or with  
configurable connectors using panelettes. Hinged lids provide quick  
access to the modules. Configurable connectors provide custom signal-  
interface options.  
Step 5 – Select Your DAQ Device and Cable (Table 5)  
Step 3 – Select Your Panelettes (Table 3)  
Select the DAQ device to control your system.  
If you have chosen an SCC carrier with configurable connectors, you can  
also select connector and interface panelettes. Different carriers offer  
different numbers of panelette slots. Also, some panelettes occupy more  
than one slot.  
Step 6 – Select Your Accessories  
Choose from rack/panel-mount kits and stacking kits. You can also select  
additional power kits separately if your application requires multiple  
power configurations.  
Step 4 – Determine Your Power Option (Table 4)  
You can power an SCC system using a +5 VDC, 120/240 VAC, or  

与777459-10相关器件

型号 品牌 描述 获取价格 数据表
777459-11 NI SCC Configuration Guide

获取价格

777459-12 NI SCC Configuration Guide

获取价格

777459-13 NI SCC Configuration Guide

获取价格

777459-14 NI SCC Configuration Guide

获取价格

777459-15 NI SCC Configuration Guide

获取价格

777459-16 NI SCC Configuration Guide

获取价格