Metal Alloy Inductors
メタルアロイ®インダクタ
DFE252010C
Inductance Range: 0.47~10.0H
Recommended patterns
推奨パターン図
(Unit: mm)
(Unit: mm)
FEATURES 特長
Miniature size: 2520 footprint (2.5mm×2.0mm) and low
profile(1.0mm Max. height)
The use of magnetic iron powder ensure capability for
large current.
The use of Flat wire for Low DC resistance.
Magnetically shielded, low audible core noise.
Reflow solderable.
小型薄型構造 (2.5x2.0mm角、高さ1.0mm Max.)
磁性材に鉄系磁性粉を用いた大電流対応
平角線採用による低直流抵抗
閉磁路構造、低コア鳴きノイズ
リフロはんだ対応
動作温度範囲:-40~+85°C
ハロゲンフリー、RoHS指令対応
Operating temperature : -40~+85°C
Halogen Free, RoHS compliant.
TOKO STANDARD PART NUMBERS 東光 標準品一覧
TYPE DFE252010C (Quantity/reel; 3,000 PCS)
東光品番
インダクタンス
許容差
測定周波数
直流抵抗
最大許容電流
DC Resistance
(m)
Max. (Typ.)
Rated DC Current
(A) Max. (Typ.)
Test
Frequency
(MHz)
TOKO Part
Number
Inductance
Tolerance
(%)
L(H)
ΔL/L=30%
ΔT=40C
1269AS-H-R47M
1269AS-H-1R0M
1269AS-H-1R5M
1269AS-H-2R2M
1269AS-H-3R3M
1269AS-H-4R7M
1269AS-H-6R8M
1269AS-H-100N
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10.0
20
20
20
20
20
20
20
30
1
1
1
1
1
1
1
1
46 (35)
78 (60)
3.5 (4.4)
2.7 (3.4)
2.1 (2.7)
1.9 (2.4)
1.5 (1.9)
1.3 (1.6)
1.1 (1.4)
1.0 (1.2)
3.1 (3.6)
2.5 (3.0)
1.9 (2.3)
1.5 (1.8)
1.2 (1.4)
1.0 (1.2)
0.76 (0.9)
0.68 (0.8)
108 (90)
156 (130)
228 (190)
300 (250)
516 (430)
689 (530)
(1)Inductance is measured with a LCR meter 4284A (Agilent
Technologies) or equivalent. Test frequency at 1MHz
(2)DC resistance is measured with 34420A (Agilent Technologies) or
3541(HIOKI). (Reference ambient temperature 20°C)
(3)Maximum allowable DC current is that which causes a 30%
inductance reduction from the initial value, coil temperature to rise
by 40°C whichever is smaller.
(1)インダクタンスはLCRメータ4284A (Agilent Technologies) また
は同等品により測定する。測定周波数は1MHz。
(2)直流抵抗は測定器34420A(Agilent Technologies)または3541
(HIOKI)と同等品により測定する。(周囲温度20°C)
(3)最大許容電流は、直流重畳電流を流した時インダクタンスの値が
初期値より30%減少する直流電流値、または直流電流により、
コイルの温度が40°C上昇の何れか小さい値。
(Reference ambient temperature 20°C)
(周囲温度20°Cを基準とする。)
21