IMF-2 Series
IMAGE REJECT MIXERS
10 to 3000 MHz / Rejection Ratios up to 30 dB / Internal Summing Quadrature / Hi-Rel Package
PRINCIPAL SPECIFICATIONS
DUAL MIXER IMAGE REJECTION
Model
LO Center Bandwidth Outline
Number Freq, fo, MHz
MHz
Style
for a given Amplitude and Phase Balance
50
IMF-2F-***/ 10 - 1000
IMF-2L-***/ 1000 - 3000
10% of fo
10% of fo
F
L
45
40
35
MODEL NUMBERING NOTE
A complete model number shall be assigned upon estab-
lishment of a full performance specification by the factory
in conjunction with the customer. The model number shall
include an indicator of the center frequency (fo) and a
special slash number to distinguish it from related units.
The format of model numbers is as above where *** =fo.
Image
Ampli.
Balance
Rejection
0.0 dB
Ratio
30
GENERAL SPECIFICATIONS
0.25 dB
(as a Down Converter)
0.5 dB
RF/LO Input Characteristics
0.75 dB
1.0 dB
Impedance:
VSWR:
RF Power Level:
LO Power Level:
IF Bandwidth:
50 W nom..
1.5:1 max.
0 dBm nom.
+10 dBm nom.
up to an octave
up to an octave
10%
25
20
15
2.0 dB
RF Bandwidth:
LO Bandwidth:
Output Characteristics
Conversion Loss:
Image Rejection:
9 dB max.
0.5
1
1.5
2
2.5
3
25 dB min.
(For Bandwidth as above)
Phase Error (degrees)
Temperature Range: -- 55° to +85°C
General Notes:
1. Image Rejection Mixers are integrated networks composed of an in-phase power divider, two double balanced mixers and two 90° quadrature
hybrids. Their principal function is the separation of two signals closely spaced in the frequency domain in, for example, a receiver’s IF stage.
2. An image is a spurious signal occurring in a receiver’s IF stage together with the real signal. Both result from the mixing process. Normally, a
passband filter selects the real signal while rejecting the image. However, when the frequency difference between the real and image signals is
relatively small, conventional bandpass filters are generally inadequate.
3. In an Image Reject Mixer, the image is separated from the real signal by vector subtraction. The resulting attenuation of the image is usually
expressed as the ‘‘Image Rejection Ratio’’ in dB. (See graph).
4. Several factors affect attainable image rejection. For example, image rejection is a function of bandwidth, the phase and amplitude balances of
the individual components chosen, mixer sensitivity and VSWR interaction among other factors. The graph allows estimating attainable image
rejection under the variables of phase error and amplitude imbalance.
5. Merrimac offers a wide range of Image Reject Mixers for numerous applications. All units are designed and built in accord with applicable
specifications. Designers are invited to work closely with Merrimac engineers to insure best results.
6. All Merrimac Image Reject Mixers comply with applicable sections of MIL-M-28837 and may be supplied screened for compliance with additional
specifications for military and space applications requiring the highest reliability.
24Apr96
ForfurtherinformationcontactMERRIMAC/41FairfieldPl.,WestCaldwell,NJ,07006/ 973 575-1300/FAX973-575-0531
5秒后页面跳转
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
国产PoE供电芯片选型替代指南，你想要的都在这里！
LM2596可调稳压器引脚功能及电路原理图
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
