100W Quad Output Switching Power Supply
PQ-100 series
Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
With power good signal output(Optional)
100% full load burn-in test
Fixed switching frequency at 45KHz
2 years warranty
SPECIFICATION
MODEL
PQ-100B
PQ-100C
OUTPUT NUMBER
CH1
CH2
CH3
-5V
CH4
CH1
CH2
CH3
-5V
CH4
DC VOLTAGE
5V
12V
-12V
0.5A
0 ~ 1A
5V
15V
-15V
0.5A
0 ~ 1A
RATED CURRENT
CURRENT RANGE
RATED POWER
10A
3.5A
0.5A
0 ~ 1A
8A
3.5A
0.5A
0 ~ 1A
2 ~ 10A
100.5W
0.5 ~ 4.5A
2 ~ 8A
102.5W
80mVp-p
CH1:4.75 ~ 5.5V
2.0%
0.5 ~ 4A
RIPPLE & NOISE (max.) Note.2 80mVp-p
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3 3.0%
250mVp-p
80mVp-p
120mVp-p
150mVp-p
80mVp-p
150mVp-p
OUTPUT
CH1:4.75 ~ 5.5V
12%
5.0%
5.0%
6.0%
1.0%
1.0%
6.0%
1.0%
1.0%
6.0%
3.0%
5.0%
6.0%
1.0%
1.0%
6.0%
1.0%
1.0%
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
1.0%
2.0%
1.0%
1.0%
1200ms, 50ms at full load
80ms at full load
100 ~ 264VAC
47 ~ 63Hz
72%
141 ~370VDC (90 ~ 100VAC 90% load max.)
FREQUENCY RANGE
EFFICIENCY(Typ.)
74%
INPUT
3A/115VAC
1.5A/230VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
COLD START 50A
LEAKAGE CURRENT
OVERLOAD
<1mA /240VAC
105% ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION
CH1: 5.75 ~ 6.75VDC
OVER VOLTAGE
Protection type : Hiccup mode, recovers automatically after fault condition is removed
1ms
FUNCTION POWER GOOD
WORKING TEMP.
-10 ~ +50 ,60 with cooling fan (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
ENVIRONMENT
TEMP. COEFFICIENT
VIBRATION
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
SAFETY &
EMC
(Note 4)
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A
MTBF
258.6K hrs min. MIL-HDBK-217F (25
177.8*107.95*46.5mm (L*W*H)
)
OTHERS
NOTE
DIMENSION
PACKING
0.56Kg; 24pcs/14.5Kg/1.19CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
5. Heat Sink HS1,HS2 can not be shorted.
File Name:PQ-100-SPEC 2012-02-03
5秒后页面跳转
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
国产PoE供电芯片选型替代指南，你想要的都在这里！
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
