5秒后页面跳转
OP284 PDF预览

OP284

更新时间: 2024-01-26 16:55:46
品牌 Logo 应用领域
麦斯威 - MAXWELL 运算放大器
页数 文件大小 规格书
16页 862K
描述
Operational Amplifiers

OP284 技术参数

生命周期:Contact Manufacturer零件包装代码:QFN
包装说明:RAD PAK, LCC-16针数:16
Reach Compliance Code:unknownECCN代码:EAR99
HTS代码:8542.33.00.01风险等级:5.58
Is Samacsys:N放大器类型:OPERATIONAL AMPLIFIER
架构:VOLTAGE-FEEDBACK最大平均偏置电流 (IIB):0.575 µA
25C 时的最大偏置电流 (IIB):0.35 µA标称共模抑制比:86 dB
频率补偿:YES最大输入失调电压:200 µV
JESD-30 代码:S-XQCC-N16长度:6.35 mm
低-失调:YES负供电电压上限:-18 V
标称负供电电压 (Vsup):-15 V功能数量:2
端子数量:16最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:UNSPECIFIED
封装代码:QCCN封装等效代码:LCC16,.25SQ
封装形状:SQUARE封装形式:CHIP CARRIER
电源:+-15 V认证状态:Not Qualified
筛选级别:38535V;38534K;883S座面最大高度:3.81 mm
标称压摆率:0.004 V/us子类别:Operational Amplifier
最大压摆率:4.5 mA供电电压上限:18 V
标称供电电压 (Vsup):15 V表面贴装:YES
技术:BIPOLAR温度等级:AUTOMOTIVE
端子形式:NO LEAD端子节距:1.27 mm
端子位置:QUAD标称均一增益带宽:4250 kHz
最小电压增益:150000宽度:6.35 mm
Base Number Matches:1

OP284 数据手册

 浏览型号OP284的Datasheet PDF文件第2页浏览型号OP284的Datasheet PDF文件第3页浏览型号OP284的Datasheet PDF文件第4页浏览型号OP284的Datasheet PDF文件第5页浏览型号OP284的Datasheet PDF文件第6页浏览型号OP284的Datasheet PDF文件第7页 
OP284  
Operational Amplifiers  
VCC  
RB1  
R3  
R4  
QB6  
QB5  
RB3  
RB4  
R11  
Q16  
Q17  
Q11  
Q9  
Q12  
Q8  
Q6  
Q7  
Q5  
QB9  
TP  
QB10  
Q4  
Q2  
Q1  
Q3  
JB1  
QL1  
QL2  
Q10  
CC2  
Flat Pack  
-IN  
+IN  
OUT  
CFF  
CO  
R6  
Q18  
QB2  
QB3  
R7  
RB2  
Q13  
Q14  
Q15  
N+  
P+  
CB1  
R9  
M
QB4  
QB7  
QB1  
QB8  
R10  
JB2  
CC1  
R8  
R1  
R2  
R5  
VEE  
Logic Diagram  
Leadless Chip Carrier (LCC)  
FEATURES:  
DESCRIPTION:  
• RAD-PAK® radiation-hardened against natural space radia-  
tion  
Total dose hardness:  
- > 100 krad (Si), depending upon space mission  
• Package:  
Maxwell Technologies’ OP284 is a dual single-supply, 4  
MHz bandwidth amplifier featuring rail-to-rail inputs and out-  
puts and a greater than 100 krad (Si) total dose tolerance,  
depending upon space mission. Using Maxwell Technolo-  
gies’ radiation-hardened RAD-PAK® technology, it is guaran-  
teed to operate from +3 to +36 (or ±1.5 to ±18) volts and will  
function with a single supply as low as +1.5 volts.  
- 8-pin RAD-PAK® flat pack  
- 16-pin RAD-PAK® Leadless Chip Carrier (LCC) pack  
• Single-Supply Operation  
Wide Bandwidth: 4 MHz  
Low Offset Voltage: 65uV  
Unity-Gain Stable  
This amplifier is superb for single supply applications requiring  
both ac and precision dc performance. The combination of  
bandwidth, low noise and precision makes the OP284 useful  
in a wide variety of applications, including filters and instru-  
mentation. Other applications for this amplifier include porta-  
ble telecom equipment, power supply control and protection,  
and as an amplifier or buffer for transducers with wide output  
ranges.  
High Slew Rate: 4.0 V/ms  
½
Low Noise: 3.9 nV/(Hz)  
The ability to swing rail-to-rail at both the input and output  
enables designers to build multi-stage filters in single-supply  
systems and to maintain high signal-to-noise ratios.  
Maxwell Technologies' patented RAD-PAK® packaging technol-  
ogy incorporates radiation shielding in the microcircuit pack-  
age. It eliminates the need for box shielding while providing  
the required radiation shielding for a lifetime in orbit or space  
mission. In a GEO orbit, RAD-PAK® provides greater than 100  
krad (Si) radiation dose tolerance. This product is available  
with screening up to Class S.  
07.25.03 Rev 3  
1
All data sheets are subject to change without notice  
(858) 503-3300 - Fax: (858) 503-3301 - www.maxwell.com  
©2003 Maxwell Technologies  
All rights reserved.  

与OP284相关器件

型号 品牌 描述 获取价格 数据表
OP284A MAXWELL Dual Operational Amplifier

获取价格

OP284ARPFB MAXWELL Dual Operational Amplifier

获取价格

OP284ARPFE MAXWELL Dual Operational Amplifier

获取价格

OP284ARPFI MAXWELL Dual Operational Amplifier

获取价格

OP284ARPFS MAXWELL Dual Operational Amplifier

获取价格

OP284ARPLB MAXWELL Dual Operational Amplifier

获取价格