19-3787; Rev 1; 9/06
2
I C Port Expander with
4 Push-Pull Outputs and 4 Inputs
General Description
Features
♦ 400kHz I2C Serial Interface
♦ +1.71V to +5.5V Operation Voltage
The MAX7322 2-wire serial-interfaced peripheral features
four push-pull outputs and four input ports with selectable
internal pullups. Input ports are overvoltage protected to
+6V and feature transition detection with interrupt output.
The four input ports are continuously monitored for state
changes (transition detection). The interrupt is latched,
allowing detection of transient changes. Any combination
of inputs can be selected using the interrupt mask to
assert the open-drain INT output. When the MAX7322 is
subsequently accessed through the serial interface, any
pending interrupt is cleared.
♦ 4 Push-Pull Output Ports Rated at 20mA Sink
Current
♦ 4 Input Ports with Maskable, Latching Transition
Detection
♦ Input Ports are Overvoltage Protected to +6V
♦ Transient Changes are Latched, Allowing
Detection Between Read Operations
♦ INT Output Alerts Change on Any Selection of
Inputs
The four push-pull outputs are rated to sink 20mA, and
are capable of driving LEDs.
♦ AD0 and AD2 Inputs Select from 16 Slave
Addresses
The RST input clears the serial interface, terminating any
♦ Low 0.6µA (typ) Standby Current
♦ -40°C to +125°C Operating Temperature Range
I2C communication to or from the MAX7322.
The MAX7322 uses two address inputs with four-level
logic to allow 16 I2C slave addresses. The slave address
also sets the power-up default logic state for the four out-
put ports, and enables or disables internal 40kΩ pullups
for the input ports.
The MAX7322 is one device in a family of pin-compatible
port expanders with a choice of input ports, open-drain
I/O ports, and push-pull output ports (see Table 1).
The MAX7322 is available in 16-pin QSOP and TQFN
packages, and is specified over the -40°C to +125°C
automotive temperature range.
Ordering Information
TEMP
PIN-
TOP
PKG
PART
RANGE PACKAGE
MARK CODE
-40°C to
16 QSOP
+125°C
MAX7322AEE+
MAX7322ATE+
—
E16-4
-40°C to 16 TQFN-EP*
ADD T1633-4
+125°C
(3mm x 3mm)
+Denotes lead-free package.
*EP = Exposed paddle.
Applications
Cell Phones
SAN/NAS
Servers
Notebooks
Satellite Radio
Automotive
Selector Guide
OPEN-
INTERRUPT
MASK
PUSH-PULL
DRAIN
PART
INPUTS
OUTPUTS
OUTPUTS
Pin Configurations
MAX7319
MAX7320
8
Yes
—
—
—
8
TOP VIEW
—
—
12
11
10
9
MAX7321 Up to 8
MAX7322
—
Up to 8
—
—
4
4
Yes
—
I5
13
SDA
V+
8
7
6
5
MAX7323 Up to 4
MAX7328 Up to 8
MAX7329 Up to 8
Up to 4
Up to 8
Up to 8
4
I4
14
—
—
—
MAX7322
—
GND
I3
AD0 15
16
*EP
RST
+
1
2
3
4
TQFN
(3mm x 3mm)
Typical Application Circuit and Functional Diagram appear
at end of data sheet.
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.