5秒后页面跳转
MAX2752EVKIT PDF预览

MAX2752EVKIT

更新时间: 2024-01-15 13:01:25
品牌 Logo 应用领域
美信 - MAXIM /
页数 文件大小 规格书
2页 101K
描述
Evaluation Kit for the MAX2750/MAX2751/MAX2752

MAX2752EVKIT 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:ObsoleteReach Compliance Code:not_compliant
风险等级:5.27最大控制电压:2.4 V
最小控制电压:0.4 VJESD-609代码:e0
调制灵敏度:170 MHz/V安装特点:SURFACE MOUNT
偏移频率:4000 kHz最大工作频率:2165 MHz
最小工作频率:2025 MHz最高工作温度:85 °C
最低工作温度:-40 °C振荡器类型:VOLTAGE CONTROLLED OSCILLATOR
输出功率:-3 dBm相位噪声:-125 dBc/Hz
物理尺寸:3.05mm x 3.05mm x 1.1mm最大压摆率:15.2 mA
标称供电电压:3 V表面贴装:YES
端子面层:Tin/Lead (Sn85Pb15)Base Number Matches:1

MAX2752EVKIT 数据手册

 浏览型号MAX2752EVKIT的Datasheet PDF文件第2页 
19-1825; Rev 0; 10/00  
MAX2750/MAX2751/MAX2752 Evaluation Kits  
General Description  
Features  
Easy Evaluation of MAX2750/MAX2751/MAX2752  
+2.7V to +5.5V Single-Supply Operation  
RF Output Matched to 50  
The MAX2750/MAX2751/MAX2752 evaluation kits  
(EV kits) simplify evaluation of the MAX2750/MAX2751/  
MAX2752 VCOs. These kits enable testing of the  
devices’ RF performance and require no additional  
support circuitry. The signal output uses an SMA con-  
nector to facilitate the connection to RF test equipment.  
All Critical Peripheral Components Included  
Component List  
Ordering Information  
DESIGNATION QTY  
DESCRIPTION  
PART  
TEMP. RANGE  
-40°C to +85°C  
-40°C to +85°C  
-40°C to +85°C  
IC-PACKAGE  
MAX2750EVKIT  
MAX2751EVKIT  
MAX2752EVKIT  
8 µMAX  
220pF 5ꢀ ceramic capacitors (0603)  
Murata GRM39COH0G221J50  
C2, C3, C4, C5  
4
8 µMAX  
8 µMAX  
0.1µF 5ꢀ ceramic capacitors (0603)  
Taiyo Yuden EMK107BJ104KA  
C1, C6  
R1, R2  
2
2
1k  
5ꢀ resistors (0603)  
Test Equipment Required  
This section lists the recommended test equipment to  
verify operation of the MAX2750/MAX2751/MAX2752. It  
is intended as a guide only, and some substitutions are  
possible.  
SMA connector (PC edge mount)  
EFJohnson 142-0701-801  
OUT  
1
JU1  
U1  
4
1
3-pin headers  
A two-channel power supply at +2.7V to +5.5V  
An ammeter (optional)  
MAX2750EUA, MAX2751EUA, or  
MAX2752EUA  
An RF spectrum analyzer (HP 8561E, for example)  
that covers the operating frequency range of the  
MAX2750/MAX2751/MAX2752, as well as a few har-  
monics  
Component Suppliers  
A 50 SMA cable  
SUPPLIER  
PHONE  
FAX  
Murata Electronics  
Taiyo Yuden  
800-831-9172  
408-573-4150  
814-238-0490  
408-573-4159  
Connections and Setup  
This section provides a step-by-step guide to the func-  
tions and operation of these EV kits.  
NOTE: Please indicate that you are using the MAX2750,  
MAX2751, or MAX2752 when contacting these component  
suppliers.  
1) Connect a DC supply set to +3V (through an amme-  
ter, if desired) to the V  
EV kit.  
and GND terminals on the  
CC  
2) Apply +3V to the SHDN control input.  
Quick Start  
3) Turn on the DC supply. The supply current should  
read about 10mA.  
The MAX2750/MAX2751/MAX2752 EV kits are fully  
assembled and factory tested. Follow the instructions in  
the Connections and Setup section for proper device  
evaluation.  
4) Connect the VCO output to a spectrum analyzer  
with a 50 coaxial cable (minimize length).  
5) Apply a variable DC voltage to the TUNE input  
(+0.4V to +2.4V).  
6) Check f  
and f  
on the spectrum analyzer by  
MAX  
MIN  
varying the tuning voltage.  
7) Check the output power level (-3dBm typ).  
________________________________________________________________ Maxim Integrated Products  
1
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,  
or visit Maxim’s website at www.maxim-ic.com.  

与MAX2752EVKIT相关器件

型号 品牌 描述 获取价格 数据表
MAX2753 MAXIM 2.4GHz Monolithic Voltage-Controlled Oscillator with Differential Outputs

获取价格

MAX2753_1 MAXIM Evaluation Kit

获取价格

MAX2753EUA MAXIM 2.4GHz Monolithic Voltage-Controlled Oscillator with Differential Outputs

获取价格

MAX2753EUA+ MAXIM Voltage Controlled Oscillator, 2400MHz Min, 2500MHz Max

获取价格

MAX2753EUA+T MAXIM 暂无描述

获取价格

MAX2753EVKIT MAXIM High-Speed.Low-Voltage.CMOS Analog Multiplexers/Switches[MAX4617/MAX4618/MAX4619/MAX4617CE

获取价格