71M6541D/F/G and 71M6542F/G
Energy Meter ICs
GENERAL DESCRIPTION
BENEFITS AND FEATURES
The 71M6541D/71M6541F/71M6541G/71M6542F/71M6542G (71M654x) are
4th-generation single-phase metering SoCs with a 5MHz 8051-
compatible MPU core, low-power RTC with digital temperature
compensation, flash memory, and LCD driver. Our Single Converter
Technology® with a 22-bit delta-sigma ADC, three or four analog
inputs, digital temperature compensation, precision voltage
reference, and a 32-bit computation engine (CE) supports a wide
range of metering applications with very few external components.
•
SoC Integration and Unique Isolation Technique
Reduces BOM Cost Without Sacrificing
Performance
•
0.1% Typical Accuracy Over 2000:1 Current
Range
•
•
•
Exceeds IEC 62053/ANSI C12.20 Standards
Four-Quadrant Metering
46-64Hz Line Frequency Range with the
Same Calibration
Phase Compensation ( 10°)
The 71M6541/2 devices support optional interfaces to the 71M6x01
series of isolated sensors, which offer BOM cost reduction, immunity
to magnetic tamper, and enhanced reliability. Other features include
an SPI interface, advanced power management, ultra-low-power
operation in active and battery modes, 3/5KB shared RAM and
32/64/128KB of flash memory that can be programmed in the field
with code and/or data during meter operation and the ability to drive
up to six LCD segments per SEG driver pin. High processing and
sampling rates combined with differential inputs offer a powerful
metering platform for residential meters.
•
•
•
•
•
•
•
•
•
•
•
Independent 32-Bit Compute Engine
32KB Flash, 3KB RAM (71M6541D)
64KB Flash, 5KB RAM (71M6541F/42F)
128KB Flash, 5KB RAM (71M6541G/42G)
Built-In Flash Security
SPI interface for Flash Program Capability
Up to Four Pulse Outputs with Pulse Count
8-Bit MPU (80515), Up to 5 MIPS
Full-Speed MPU Clock in Brownout Mode
LCD Driver Allows Up to 6 Commons/Up to
56 Pins
A complete array of code development tools, demonstration code,
and reference designs enable rapid development and certification of
meters that meet all ANSI and IEC electricity metering standards
worldwide.
•
•
•
•
•
5V LCD Driver with DAC
The 71M654x family operates over the industrial temperature range
and comes in 64-pin (71M6541D/F/G) and 100-pin (71M6542F/G)
lead(Pb)-free LQFP packages.
Up to 51 Multifunction DIO Pins
Hardware Watchdog Timer (WDT)
Two UARTs for IR and AMR
IR LED Driver with Modulation
Shunt
•
Innovative Isolation Technology (Requires
Companion 71M6xxx Sensor, also from Maxim
Integrated) Eliminates Current Transformers
NEUTRAL
LOAD
Note:
This system is referenced to LINE
Shunt
LINE
•
•
•
Two Current Sensor Inputs with Selectable
Differential Mode
NEUTRAL
LINE
POWER SUPPLY
Selectable Gain of 1 or 8 for One Current
Input to Support Shunts
High-Speed Wh/VARh Pulse Outputs with
Programmable Width
71M6xx1
MUX and ADC
V3P3A V3P3SYS GNDA GNDD
PWR MODE
CONTROL
IAP
IAN
•
Digital Temperature Compensation Improves
System Performance
WAKE-UP
Pulse
Trans-
former
71M6541D/F/G
REGULATOR
BATTERY
VBAT
•
Metrology Compensation
VA
VBAT_RTC
RTC
BATTERY
BATTERY
MONITOR
SENSOR
IBP
IBN
•
Accurate RTC for TOU Functions with
Automatic Temperature Compensation for
Crystal in All Power Modes
TEMPERATURE
VREF
RAM
COM0...5
LCD DISPLAY
SERIAL PORTS
SEG
COMPUTE
ENGINE
8888.8888
•
Power Management Extends Battery Life During
Power Outages
TX
RX
SEG/DIO
AMR
IR
LCD DRIVER
DIO, PULSES
FLASH
DIO
PULSES,
DIO
MEMORY
MODUL-
RX
ATOR
•
Three Battery-Backup Modes:
TX
I2C or µWire
EEPROM
o
o
o
Brownout Mode (BRN)
LCD Mode (LCD)
Sleep Mode (SLP)
POWER FAULT
COMPARATOR
MPU
RTC
TIMERS
V3P3D
OSCILLATOR/
PLL
XIN
SPI INTERFACE
32 kHz
HOST
ICE
XOUT
•
•
Wake-Up on Pin Events and Wake-On
Timer
11/5/2010
1µA in Sleep Mode
Single Converter Technology is a registered trademark of Maxim Integrated
Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct at
1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
19-5376; Rev 5; 1/15