19-0539; Rev 4; 9/02
Microprocessor Voltage Monitors
with Programmable Voltage Detection
________________General Description
____________________________Features
ꢀ µP Power-Fail Warning
Maxim’s MAX8211 and MAX8212 are CMOS micropower
voltage detectors that warn microprocessors (µPs) of
power failures. Each contains a comparator, a 1.5V
bandgap reference, and an open-drain N-channel output
driver. Two external resistors are used in conjunction with
the internal reference to set the trip voltage to the desired
level. A hysteresis output is also included, allowing the user
to apply positive feedback for noise-free output switching.
ꢀ Improved 2nd Source for ICL8211/ICL8212
ꢀ Low-Power CMOS Design
ꢀ 5µA Quiescent Current
ꢀ On-Board Hysteresis Output
ꢀ
40mV Threshold Accuracy ( 3.5%)
ꢀ 2.0V to 16.5V Supply-Voltage Range
ꢀ Define Output Current Limit (MAX8211)
ꢀ High Output Current Capability (MAX8212)
The MAX8211 provides a 7mA current-limited output sink
whenever the voltage applied to the threshold pin is less
than the 1.5V internal reference. In the MAX8212, a voltage
greater than 1.5V at the threshold pin turns the output
stage on (no current limit).
_______________Ordering Information
The CMOS MAX8211/MAX8212 are plug-in replacements
for the bipolar ICL8211/ICL8212 in applications where the
maximum supply voltage is less than 16.5V. They offer sev-
eral performance advantages, including reduced supply
current, a more tightly controlled bandgap reference, and
more available current from the hysteresis output.
PART
TEMP RANGE
PIN-PACKAGE
8 Plastic DIP
8 SO
MAX8211CPA
MAX8211CSA
MAX8211CUA
MAX8211CTY
MAX8211EPA
MAX8211ESA
MAX8211EJA
MAX8211ETY
MAX8211MJA
MAX8211MTV
0°C to +70°C
0°C to +70°C
0°C to +70°C
8 µMAX
0°C to +70°C
8 TO-99
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-55°C to +125°C
8 Plastic DIP
8 SO
________________________Applications
8 CERDIP
8 TO-99
µP Voltage Monitoring
Undervoltage Detection
Overvoltage Detection
Battery-Backup Switching
Power-Supply Fault Monitoring
Low-Battery Detection
8 CERDIP
8 TO-99
Ordering Information continued on last page.
*Contact factory for dice specifications.
___________________Pin Configuration
___________Typical Operating Circuit
V+
TOP VIEW
R3
V+
N.C.
1
8
7
6
5
V+
HYST
µP
NMI
N.C.
2
3
HYST
THRESH
OUT
OUT
MAX8211
MAX8212
R2
R1
MAX8211
THRESH
N.C.
GND
GND
4
DIP/SO
LOGIC-SUPPLY UNDERVOLTAGE DETECTOR
(DETAILED CIRCUIT DIAGRAM—FIGURE 5)
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.