Special Encoders & Sensors
Contact encoder, surface mount housing
Impulse ratio 1 rev. = 15 impulses up to 5 rev. = 1 impulse
G 080
Features
– Encoder with mechanical contact
– As trigger for electromechanical counters
– Impulse voltage 12...230 VAC/VDC
– Surface mount housing (for measuring wheel)
– Ratio up to one revolution = 15 impulses
– Reduction ratio up to 5 revolutions = 1 impulse
– High switching capacity
– Sturdy design
G 080 surface mount housing
Technical data - electrical ratings
Technical data - mechanical design
Voltage supply
12...220 V
0.2...15
Housing
Shaft
ø73 mm
Resolution (steps/turn)
Operating mode
ø7 mm (sinter bronze slide
bearing)
Pulse emission in both
rotational directions
Protection DIN EN 60529 IP 52
Contact load
≤30 W (100 VA)
≤230 V (approx. 2 A)
Operating speed
Starting torque
Material
≤1500 rpm
≤0.02 Nm IP 30
Housing: GFV Polycarbonat
-10...+60 °C
Sensing method
Output frequency
Output signals
Mechanic
≤0.025 kHz
Contact
Operating temperature
Relative humidity
Weight approx.
E-connection
95 % non-condensing
250 g
Cable
www.baumerivo.com
1