Rad-Hard 16 Channel CMOS Analog Multiplexer
with High-Z Analog Input Protection
HS-1840ARH, HS-1840BRH
Features
• Electrically Screened to SMD # 5962-95630
• QML Qualified per MIL-PRF-38535 Requirements
• Pin-to-Pin for Intersil’s HS-1840RH and HS-1840/883S
• Improved Radiation Performance
The HS-1840ARH, HS-1840BRH are radiation hardened,
monolithic 16 channel multiplexers constructed with the
Intersil Rad-Hard Silicon Gate, bonded wafer, Dielectric
Isolation process. They are designed to provide a high input
impedance to the analog source if device power fails
(open), or the analog signal voltage inadvertently exceeds
the supply by up to ±35V, regardless of whether the device
is powered on or off. Excellent for use in redundant
applications, since the secondary device can be operated in
a standby unpowered mode affording no additional power
drain. More significantly, a very high impedance exists
between the active and inactive devices preventing any
interaction. One of sixteen channel selections is controlled
by a 4-bit binary address plus an Enable-Inhibit input which
conveniently controls the ON/OFF operation of several
multiplexers in a system. All inputs have electrostatic
discharge protection. The HS-1840ARH, HS-1840BRH are
processed and screened in full compliance with
5
- Gamma Dose (γ) 3x10 RAD(Si)
• Improved r
DS(ON)
Linearity
• Improved Access Time 1.5µs (Max) Over Temp and
Post Rad
• High Analog Input Impedance 500MΩ During Power
Loss (Open)
• ±35V Input Overvoltage Protection (Power On or Off)
• Dielectrically Isolated Device Islands
• Excellent in Hi-Rel Redundant Systems
• Break-Before-Make Switching
MIL-PRF-38535 and QML standards. The devices are
available in a 28 Ld SBDIP and a 28 Ld Ceramic Flatpack.
• No Latch-Up
Specifications for Rad Hard QML devices are
controlled by the Defense Supply Center in
Columbus (DSCC). The SMD numbers listed here
must be used when ordering.
Detailed Electrical Specifications for these devices
are contained in SMD 5962-95630. A “hot-link” is
provided on our homepage for downloading.
http://www.intersil.com/spacedefense/space.htm
Ordering Information
ORDERING
INTERNAL
TEMP. RANGE
(°C)
PART
MARKING NO.
NUMBER
MKT. NUMBER
PACKAGE
28 Ld SBDIP
28 Ld Flatpack
28 Ld SBDIP
28 Ld Flatpack
28 Ld SBDIP
28 Ld Flatpack
28 Ld SBDIP
5962F9563002QXC
HS1-1840ARH-8
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
Q 5962F95 63002QXC
Q 5962F95 63002QYC
Q 5962F95 63002VXC
Q 5962F95 63002VYC
HS1- 1840ARH /PROTO
HS9- 1840ARH /PROTO
Q 5962R95 63002TXC
5962F9563002QYC
5962F9563002VXC
5962F9563002VYC
HS1-1840ARH/PROTO
HS9-1840ARH/PROTO
HS1-1840ARH-T
HS9-1840ARH-8
HS1-1840ARH-Q
HS9-1840ARH-Q
HS1-1840ARH/PROTO
HS9-1840ARH/PROTO
HS1-1840ARH-T
5962F9563002V9A
5962F9563003QXC
HS0-1840ARH-Q
HS1-1840BRH-8
Q 5962F95 63003QXC
28 Ld SBDIP
September 14, 2010
FN4355.3
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2009, 2010. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.