Double Balanced Mixers (Relay Headers)
MC-600R Series
These mixers mix the RF signal and LO signal to
produce the IF signal (i.e., fIF = fRF - fLO)
ꢀFeatures
1.Suited for High-Density Mounting
Ultraminiature design with a 2.54 mm pitch
enables high-density mounting.
2.LO Level of +7 dBm
Mixers operate at a LO level of +7 dBm
.
MC-602R
3.Highly Reliable Design
The metal case is designed with a hermetically sealed
construction which contains inert gas. This permits
quality to be maintained over a long period.
4.Easy Soldering
The leads have received solder dip processing
which makes soldering work easier
.
MC-601R
5.Prevention of Flux Creepage
Use of the supplied Teflon sheet permits the
prevention of solder flux creepage.
ꢀProduct Specifications
Frequency range (Note)
Characteristic impedance
Maximum Input Power
30 to 1800 MHz
50 ohms
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
Ratings
30 mW
(Total input power)
Note: The frequency range will differ depending on the products.
Item
Standard
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.5 mm,
acceleration of 98 m/s for 4 hours in each of 3 directions
1.Vibration
2.Shock
2
2
No damage, cracks, or parts dislocation
Acceleration of 294 m/s , sine half-wave waveform, 3 cycles in each of the 3 axis
Temperature: -35
Time: 30 ꢀ 15 max. ꢀ 30 ꢀ 15 max. (Minutes)
5 cycles
ç ꢀ +5ç to +35ç ꢀ +80ç ꢀ +5ç to +35ç
3.Temperature cycle
The test method conforms to MIL-STD-202.
ꢀ
ꢀMaterials
ꢀExternal Dimensions
Teflon sheet (t=0.2)
Part
Material
Iron
Finish
Nickel plating
Solder dip
----------
External Cladding
Contacts
Iron-nickel alloy
Glass
Hermetic seal
ꢀOrdering Information
Green hermetic seal 1.6 mm dia.
ꢀFunction Diagram
MC - 6 0 1 R
1
2 3 4 5
1
2
4
5
Series Name: MC
Suffix
6: Indicates double balanced mixer.
Form of Case
R: Relay header
LO level
3
2, 5, 6, and 7 are ground.
2, 3, 5, 6, and 7 are ground.
(Note that 2, 3, 5, 6, and 7 are case ground.)
0: +7dBm
(Note that 2 is case ground.)
54