I M A G E S E N S O R
Flat panel sensor
C10013SK
High reliability, high sensitivity
Flat panel sensor C10013SK is a digital X-ray image sensor newly developed as a key device for open-type tube application, radiography and
other real-time X-ray imaging applications requiring high resolution and high image quality.
Features
Applications
Low noise: 80 electrons
Energy range: 150 kVp Max.
High quality image: 1 Mpixels
Pixel size: 50 × 50 µm
Digital output (12-bits)
High-speed imaging:
Open type tube application
Radiography
4 frames/s (single binning)
Long life: 150 kVp, 2 MR
Wide dynamic range
ꢀ Block diagram
C10013SK is a lightweight and compact flat panel sensor consisting of a sensor board and a control board. Each pixel has low
noise amplifier. Analog video signals are amplified as the charge on each video line by 1056 ch differential amplifiers with CDS
(Correlated Double Sampling) circuits, and are output from each of 8 amplifier arrays. The control board converts the analog
video signal into a 12-bit digital signal and outputs it to an external frame grabber through the 12-bit parallel port.
PIXEL NUMBER
1
2
1055 1056
2111 2112
EXTERNAL POWER SUPPLY
A.vdd, D.vdd
(not attached)
1057
FOP WITH
GOS SCINTILLATOR
(52.8 mm × 52.8 mm)
PHOTODIODE
ARRAY
IntExt
OSCILLATOR
1115135 1115136
TIMING
PULSE
GENERATOR
ExtTrgLemo
DIFFERENTIAL
AMP ARRAY No. 1
DIFFERENTIAL
AMP ARRAY No. 8
ExtTrgGrb
Vsync
Hsync
Pclk
BIAS
GENERATOR
BUFFER
AMP
PROCESSING
AMP
A/D
A/D
FIFO
FIFO
VIDEO OUTPUT
(12 BIT DIGITAL)
BUFFER
AMP
PROCESSING
AMP
Note: Signals are readout in order of pixel number.
KACCC0207EB
1