6MBP75RJ120
IGBT IPM R-series 1200V class
1200V / 75A 6 in one-package
Features
· Temperature protection provided by directly detecting the junction
temperature of the IGBTs
· Low power loss and soft switching
· High performance and high reliability IGBT with overheating protection
· Higher reliability because of a big decrease in number of parts in
built-in control circuit
Maximum ratings and characteristics
Absolute maximum ratings(at Tc=25°C unless otherwise specified)
Item
Symbol
Rating
Unit
Min.
Max.
VDC
VDC(surge)
VSC
VCES
IC
Bus voltage
DC
0
900
V
Surge
0
1000
V
Short operating
200
800
1200
75
V
Collector-Emitter voltage *1
Collector current
0
-
V
DC
A
ICP
1ms
-
150
75
A
-IC
Duty=76.1% *2
-
A
PC
Collector power dissipation One transistor *3
Supply voltage of Pre-Driver *4
Input signal voltage *5
-
500
20
W
V
VCC
Vin
-0.5
-0.5
Vcc+0.5
3
V
Iin
Input signal current
-
mA
V
VALM
IALM
Tj
Alarm signal voltage *6
-0.5
Vcc
20
Alarm signal current *7
-
-
mA
°C
°C
°C
V
Junction temperature
150
100
125
AC2500
3.5
Topr
Tstg
Operating case temperature
Storage temperature
-20
-40
Viso
Isolating voltage (Terminal to base, 50/60Hz sine wave 1min.)
-
-
-
Screw torque
Terminal (M5)
Mounting (M5)
N·m
N·m
3.5
Note
*1 : Vces shall be applied to the input voltage between terminal P and U or ‚u or W, N and U or V or W
*2 : 125°C/FWD Rth(j-c)/(Ic x VF MAX)=125/0.73/(75 x 3.0) x 100=76.1%
*3 : Pc=125°C/IGBT Rth(j-c)=125/0.25=500W [Inverter]
*4 : VCC shall be applied to the input voltage between terminal No.4 and 1, 8 and 5, 12 and 9, 14 and 13
*5 : Vin shall be applied to the input voltage between terminal No.3 and 1, 7 and 5, 11 and 9, 16,17,18 and 13.
*6 :VALM shall be applied to the voltage between terminal No.2 and 1, No6 and 5, No10 and 9, No.19 and 13.
*7 : IALMshall be applied to the input current to terminal No.2,6,10 and 19.