Document Number: MC34716
Rev. 3.0, 5/2007
Freescale Semiconductor
Advance Information
1.0 MHz Dual Switch-Mode DDR
Power Supply
34716
The 34716 is a highly integrated, space-efficient, low cost, dual
synchronous buck switching regulator with integrated N-channel
power MOSFETs. It is a high performance point-of-load (PoL) power
supply with its second output having the ability to track an external
reference voltage. it provides a full power supply solution for Double-
Data-Rate (DDR) Memories.
DUAL SWITCH-MODE DDR POWER
SUPPLY
Channel one provides a source only 5.0 A drive capability, while
channel two can sink and source up to 3.0 A. Both channels are highly
efficient with tight output regulation. With its high current drive
capability, channel one can be used to supply the VDDQ to the
memory chipset. The second channel’s ability to track a reference
voltage makes it ideal to provide the termination voltage (VTT) for
modern data buses. The 34716 also provides a buffered output
reference voltage (VREFOUT) to the memory chipset
The 34716 offers the designer the flexibility of many control,
supervisory, and protection functions to allow for easy implementation
of complex designs. It is housed in a Pb-Free, thermally enhanced,
and space efficient 26-Pin Exposed Pad QFN.
EP SUFFIX
98ASA10728D
26-PIN QFN
Features
• 50 mΩ Integrated N-Channel Power MOSFETs
• Input Voltage Operating Range from 3.0 V to 6.0 V
ORDERING INFORMATION
Temperature
•
±1 % Accurate Output Voltages, Ranging from 0.7 V to 3.6 V
• The second output Tracks 1/2 an External Reference Voltage
±1 % Accurate Buffered Reference Output Voltage
Package
Device
Range (T )
A
•
MC34716EP/R2
-40 to 85°C
26 QFN
• Programmable Switching Frequency Range from 200 kHz to
1.0 MHz
• Programmable Soft Start Timing for Channel One
• Over Current Limit and Short Circuit Protection on Both Channels
• Thermal Shutdown
• Output Overvoltage and Undervoltage Detection
• Active Low Power Good Output Signal
• Active Low Standby and Shutdown Inputs
• Pb-Free Packaging Designated by Suffix Code EP.
34716
3.0V to 6.0V VIN
PVIN2
VIN
VDDQ
VREFIN
BOOT2
PVIN1
BOOT1
VDDQ
VTT
SW2
SW1
VOUT1
VOUT2
Termination
Resistors
VDDQ
INV2
INV1
DDR Memory
Chipset
DDR Memory
Controller
Memory Bus
COMP1
PGND1
COMP2
VREFOUT
PGND2
VREF
VIN
VDDI
FREQ
PG
MCU
STBY
SD
ILIM1
GND
Figure 1. 34716 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2007. All rights reserved.