QA-1000HC
Full Featured Programmable
Analog Supply Current
Monitor
APPLICATIONS
FEATURES
ꢀContinuous Analog Supply Current Measurement
ꢀStatic and transient Analog Supply Current
Measurements
ꢀPositive and negative supply and ground current
measurement
ꢀ Wide IDDX Measurement BW: 0 – 5 MHz
ꢀ High IDDX resolution: 300 µARMS
ꢀ High IDDX Measurement Range: 0 – 2 A
ꢀ High Loading Capacitance: 0 – 100 µF
ꢀ Low internal resistance: 25mΩ
ꢀAnalog Current Measurements
DESCRIPTION
The QA-1000HC is a configurable analog supply
current monitor, designed for loadboard applications. Its
low internal resistance ensures its transparency (causing
only a negligible voltage drop when inserted into the supply
or ground path of the device under test). The module is
designed to be inserted between the DUT supply provided
by the ATE and the supply pin of the DUT or between
ground and DUT ground. The VDUT supply can be positive
or negative (VDD/VCC or VSS/VEE).
The QA-1000HC is designed to accurately measure analog (supply) currents up to 2A (upon demand
the range can be adapted to 100mA, 200mA, 500mA, 1A or 5A), thereby providing a high
measurement repeatability. The monitor has a bandwidth of 5MHz, offers a resolution of 300µA @2A,
and is capable to drive high capacitive loads up to 100uF. The resolution and performance of the
monitor is a function of the selected bandwidth and the value of the loading capacitance CL (the DUT
local on-pin supply decoupling capacitance).
The QA-1000HC has no digital control pins. It measures continuously and relies for further signal
processing and decision making on the capabilities of the mixed-signal ATE. The QA-1000HC
provides an analog output voltage, corresponding to the measured current. The figure shows a block
diagram of the QA-1000HC as well as a typical application diagram. The output has a 50Ω impedance
for optimum RF performance. The low resistive output can be customised when AF performance is
preferred.
The QA-1000HC consists of
2
active units,
a
measurement unit (MU) and a processing unit (PU). The
measurement unit is a fast and sensitive current
measurement device that converts the measured analog
current in a corresponding voltage. The processing unit is
configurable and provides amplification and filtering
functionality. The QA-1000HC has a low internal resistance
between its VDUT and DUT terminals, therefore the
voltage at the DUT terminal closely follows the supply
voltage applied at its VDUT terminal within a -7V to +7V
range. The QA-1000HC has a broad application range.
Examples are the application to high-power ICs and during
voltage stress test applications. By using two QA-1000-HC
monitors, supply currents of analog DUTs with
(symmetrical) +/- supply can also be measured
simultaneously.
S U P P L Y
Y
L
QA-1000HC
PU
P
P
VIDD
S
MU
CL
ATE
T E S T V E C T O R S
© Q-Star Test nv, 2003
Revision C - page 1 of 6
L.Bauwensstraat 20, B-8200 Brugge, Belgium, Tel.: +32 50 319273, Fax: +32 50 312350, http://www.Qstar.be
5秒后页面跳转
全球首块英伟达H200交付 黄仁勋“送货上门”
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
