MX98905B
FEATURES
– Squelch on receive and collision pairs
• Control
• TPI module (10BASE-T) transceiver
– Transmitter and receiver functions
– Collision detect, heartbeat and jabber
– Selectable link integrity test or link disable
– Polarity detection/correction
– Controller and integrated bus interface total solu-
tion for IEEE 802.3, 10BASE5, 10BASE2 and
10BASE-T
– Software-compatible with industry standard
Ethernet adapters:
• Provides more powerful functions than NS DP83905
– Supports 15 I/O bases instead of 7
– Direct ID PROM access through I/O port instead
of through remote DMA
* Novell®'s NE 2000
* Western Digital/SMC's (8003E, 8003EBT,
8013EBT)
– Selectable buffer memory size
– No external bus logic or drivers
– Integrated controller, MCC and transceiver
– Full IEEE 802.3 AUI interface
– Single 5V supply
– Auto configuration function-supported makes
jumperless more powerful
– Solution for multiple LAN cards I/O bases conflict
problem to make manufacture more efficient.
– Supports "write ID back to EEPROM" function
instead of just writing configuration back to
EEPROM to make manufacture more efficient.
– Modify current configurations without turning off
power
– Software-compatible with DP8390, DP83901
and DP83902
– Efficient buffer management implementation
• MCC module (Manchester Code Converter, also
called ENDEC)
– Variety of EEPROM supported
– 10 Mbit/s Manchester encoding/decoding
GENERAL DESCRIPTION
Manchester encoding and decoding is made possible
through the integrated ENDEC by means of a differ-
ential transceiver and phase lock loop decoder at 10
Mbit/sec. Collision detect translator and diagnostic
loopback capability are included in this process.
Interfacing directly with the transceiver module, the
ENDEC module also provides a fully IEEE-compliant
AUI (Attachment Unit Interface) to connect with other
media transceivers.
The MX98905 is designed for easy implementation of
CSMA/CD local area networks, which include
Ethernet® (10BASE5), Thin Ethernet (10BASE2), and
Twisted-pair Ethernet (10BASE-T). The Media Ac-
cess Control (MAC) and Encode-Decode (ENDEC)
are provided with an AUI interface. The 10BASE-T
transceiver functions according to the IEEE 802.3
standards, and the MX98905 10BASE-T transceiver
operations in compliance with the IEEE standard.
The Media Access Control function, provided by the
Ethernet Network Control (ENC) module, effects an
efficient packet transmission and reception control
through unique dual DMA channels and an internal
FIFO. To lessen board cost and area overheads, bus
arbitration and memory control logic are integrated.
The functional block of the MX98905 consists of the
integration of the entire bus interface for PC-AT®
(Industry Standard Architecture, ISA) bus-based sys-
tems, receiver, transmitter, collision, heartbeat,
loopback, jabber, and link integrity blocks. When
combined with equalization resistors, the transceiver
transmits or receives filters, and pulse transformers
provide physical interface from the ENDEC module of
the MX98905 and the twisted-pair medium.
Designed for easy interface with other transceivers by
means of the AUI interface, the MX98905 provides a
thorough single chip solution for 10BASE-T IEEE
802.3 network.
When software and hardware are properly configured,
the MX98905 can be set to be compatible with either
the NE2000 or EtherCard PLUS16™. All bus drivers
and control logic are integrated inside the chip to
reduce LAN card cost and area.
Constraints of CMOS processing require that
isolation, whether capacitive or inductive, be used at
the AUI differential signal interface for 10BASE5 and
10BASE2 applications.
REV. 1.3, NOV 20 ,1995
1
P/N: PM0365
5秒后页面跳转
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
国产PoE供电芯片选型替代指南，你想要的都在这里！
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
