5秒后页面跳转
T0615 PDF预览

T0615

更新时间: 2022-05-07 06:19:01
品牌 Logo 应用领域
EPSON /
页数 文件大小 规格书
1页 613K
描述
Refi ll instructions Epson

T0615 数据手册

  
Refill instructions Epson T0611 | T0612 | T0613 | T0614 | T0615  
Please carefully read these instructions before refilling your ink cartridges. Always carry out the ink refill process on a dirt resistant mat and have a moist cloth to hand to quickly  
remove any ink spillage. The instructions apply only to the ink cartridges referred to above. The syringe and ink should be kept away from children. We accept no responsibility for  
any damage caused by inadequate or incorrect actions carried out during the refilling process. The refilling of ink cartridges is carried out at your own risk. An empty ink cartridge  
of this type can be refilled with approximately 8 ml of ink.  
1.  
2.  
3.  
In order to refill an ink cartridge, a syringe filled with  
ink is required. Open the cap of one of the enclosed ink  
holders, which also acts as a syringe. Now insert the  
enclosed blunt needle using a twisting motion into the  
opening. Hold the lower part of the ink holder with your  
thumb and forefinger and twist it counter clockwise into  
the appliance.  
Then seal the ink outlet opening with an adhesive  
tape and place the ink cartridge in an upright position.  
Next, using the tool provided, drill a hole approximately  
7 mm deep through the designated opening. Drill carefully,  
as there are 2 inner walls to drill through.  
4.  
5.  
6.  
Now insert the syringe into the newly made opening and  
fill the ink chamber slowly and carefully until just below  
the opening. Should some of the ink leak out, simply  
remove it by using the syringe.  
Seal the newly drilled hole with an adhesive strip and  
then leave the ink cartridge for a few hours to allow the  
ink enough time to spread throughout the ink chamber.  
Finally, the ink cartridge chip ink fluid level reading needs  
to be reset. In order to do this, press the reset device  
(not included with the refill kit set) pins against the ink  
cartridge chip contact. After removing the adhesive tape  
from the ink outlet area, the refilled ink cartridge can  
then be inserted into the printer. Please be aware of the  
possibility of ink leakage.  
You are facing difficulties refilling your ink cartridges or require more information about the refilling procedure? Please feel free to contact us. The address is as follow:  
ink.co.uk Customer Care Department PO Box 987 – Canterbury CT1 9EF info@ink.co.uk  
Logos, brand names and product descriptions are the property of their respective manufacturers and are used for reference purposes only.  

与T0615相关器件

型号 品牌 描述 获取价格 数据表
T062 ETC 8输入端单与非门(三态)

获取价格

T0620H-6A JJM 高结温双向可控硅

获取价格

T0620H-6C JJM 高结温双向可控硅

获取价格

T0620H-6E JJM 高结温双向可控硅

获取价格

T0620H-6F JJM 高结温双向可控硅

获取价格

T0620H-6H JJM 高结温双向可控硅

获取价格