Datasheet > T0612

T0612

更新时间： 2024-02-21 12:50:36

品牌	Logo	应用领域
EPSON		/
页数	文件大小	规格书
1页	613K
描述
Refi ll instructions Epson

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

T0612 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
Reach Compliance Code：	not_compliant	HTS代码：	8541.30.00.80
风险等级：	5.73	配置：	SINGLE
换向电压的临界上升率-最小值：	5 V/us	关态电压最小值的临界上升速率：	500 V/us
最大直流栅极触发电流：	50 mA	最大直流栅极触发电压：	2.5 V
最大维持电流：	50 mA	JESD-30 代码：	R-PSFM-T3
JESD-609代码：	e3	最大漏电流：	2 mA
元件数量：	1	端子数量：	3
最高工作温度：	125 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装形状：	RECTANGULAR
封装形式：	FLANGE MOUNT	认证状态：	Not Qualified
最大均方根通态电流：	6 A	断态重复峰值电压：	700 V
子类别：	TRIACs	表面贴装：	NO
端子面层：	Matte Tin (Sn)	端子形式：	THROUGH-HOLE
端子位置：	SINGLE	触发设备类型：	4 QUADRANT LOGIC LEVEL TRIAC
Base Number Matches：	1

T0612 数据手册

Reﬁll instructions Epson T0611 | T0612 | T0613 | T0614 | T0615

Please carefully read these instructions before reﬁlling your ink cartridges. Always carry out the ink reﬁll process on a dirt resistant mat and have a moist cloth to hand to quickly

remove any ink spillage. The instructions apply only to the ink cartridges referred to above. The syringe and ink should be kept away from children. We accept no responsibility for

any damage caused by inadequate or incorrect actions carried out during the reﬁlling process. The reﬁlling of ink cartridges is carried out at your own risk. An empty ink cartridge

of this type can be reﬁlled with approximately 8 ml of ink.

In order to reﬁll an ink cartridge, a syringe ﬁlled with

ink is required. Open the cap of one of the enclosed ink

holders, which also acts as a syringe. Now insert the

enclosed blunt needle using a twisting motion into the

opening. Hold the lower part of the ink holder with your

thumb and foreﬁnger and twist it counter clockwise into

the appliance.

Then seal the ink outlet opening with an adhesive

tape and place the ink cartridge in an upright position.

Next, using the tool provided, drill a hole approximately

7 mm deep through the designated opening. Drill carefully,

as there are 2 inner walls to drill through.

Now insert the syringe into the newly made opening and

ﬁll the ink chamber slowly and carefully until just below

the opening. Should some of the ink leak out, simply

remove it by using the syringe.

Seal the newly drilled hole with an adhesive strip and

then leave the ink cartridge for a few hours to allow the

ink enough time to spread throughout the ink chamber.

Finally, the ink cartridge chip ink ﬂuid level reading needs

to be reset. In order to do this, press the reset device

(not included with the reﬁll kit set) pins against the ink

cartridge chip contact. After removing the adhesive tape

from the ink outlet area, the reﬁlled ink cartridge can

then be inserted into the printer. Please be aware of the

possibility of ink leakage.

You are facing difﬁculties reﬁlling your ink cartridges or require more information about the reﬁlling procedure? Please feel free to contact us. The address is as follow:

ink.co.uk • Customer Care Department • PO Box 987 – Canterbury • CT1 9EF • info@ink.co.uk

Logos, brand names and product descriptions are the property of their respective manufacturers and are used for reference purposes only.

下载PDF

与T0612相关器件

型号	品牌	描述	获取价格	数据表
T0612DH	STMICROELECTRONICS	400V, 6A, 4 QUADRANT LOGIC LEVEL TRIAC	获取价格
T0612MH	STMICROELECTRONICS	600V, 6A, 4 QUADRANT LOGIC LEVEL TRIAC	获取价格
T0612NH	STMICROELECTRONICS	800V, 6A, 4 QUADRANT LOGIC LEVEL TRIAC	获取价格
T0612SH	STMICROELECTRONICS	700V, 6A, 4 QUADRANT LOGIC LEVEL TRIAC	获取价格
T0613	EPSON	Refi ll instructions Epson	获取价格
T0614	EPSON	Refi ll instructions Epson	获取价格

与T0612相关文章

MAX487芯片引脚图及功能、应用领域详解
2024-04-17

10
IR2110驱动芯片引脚图及功能、电路图详解
2024-04-17

9
74LS74是什么芯片 74LS74引脚图及功能表
2024-04-16

12
CD4511芯片引脚图及功能、电路图解析
2024-04-15

20

产品中心

服务支持

精选活动

关于我们

帮助中心

T0612

T0612 技术参数

T0612 数据手册

与T0612相关器件

与T0612相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

T0612

T0612 技术参数

T0612 数据手册

与T0612相关器件

与T0612相关文章

您还可以找

您在本页遇到什么问题？