ELH0033G/883/8001401ZX
Fast Buffer Amplifier
Features
# Slew rateÐ1500 V/ms
# Output driveÐ100 mA
General Description
The ELH0033 is a high-speed, FET input voltage follower buff-
er designed to provide high output currents from DC to over
100 MHz. The ELH0033 slews at 1500 V/ms and will drive 100X
loads. Phase linearity is excellent to 20 MHz, allowing the buff-
er to be included in op amp loops.
# Rise and fall timesÐ2.9 ns
11
# Input resistanceÐ10
X
# Power bandwidthÐ100 MHz
# MIL-STD-883 devices 100%
manufactured in U.S.A.
The ELH0033 is intended to fulfill a wide range of buffer appli-
cations such as high-speed line drivers, video impedance trans-
formation, nuclear instrumentation amplifiers, op amp isolation
buffers for driving reactive loads and high impedance input
buffers for high-speed A to D’s and comparators.
Advantages
# Excellent phase linearity
# Driver cables and other
capacitive loads
These devices are constructed using specially selected junction
FETs and active laser trimming to achieve guaranteed perform-
ance specifications. The ELH0033 is specified for operation
# Wide supply range, single or split
b
a
from 55 C to 125 C.
§
§
Ordering Information
Ý
Temp. Range Package Outline
Elantec facilities comply with MIL-I-45208A and other applica-
ble quality specifications. Elantec’s Military devices are 100%
fabricated and assembled in our rigidly controlled, ultra-clean
facilities in Milpitas, California. For additional information on
Elantec’s Quality and Reliability Assurance policy and proce-
dures request brochure QRA-1.
Part No.
b
a
ELH0033G/883B 55 C to 125 C TO-8 MDP0002
§
§
8001401ZX is the SMD version of this device.
Connection Diagram
12-Pin TO-8
Equivalent Schematic
0033–1
Top View
Note: Case is electrically isolated.
0033–2
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a ‘‘controlled document’’. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation. Patent pending.
©
1989 Elantec, Inc.