5秒后页面跳转
EL6203CW PDF预览

EL6203CW

更新时间: 2024-02-02 21:38:17
品牌 Logo 应用领域
ELANTEC 振荡器驱动器
页数 文件大小 规格书
2页 158K
描述
Laser Driver Oscillator

EL6203CW 技术参数

是否Rohs认证: 符合生命周期:Obsolete
零件包装代码:SOT-23包装说明:LSSOP,
针数:5Reach Compliance Code:compliant
风险等级:5.63接口集成电路类型:INTERFACE CIRCUIT
JESD-30 代码:R-PDSO-G5JESD-609代码:e3
长度:2.9 mm湿度敏感等级:3
功能数量:1端子数量:5
最高工作温度:70 °C最低工作温度:
封装主体材料:PLASTIC/EPOXY封装代码:LSSOP
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
峰值回流温度(摄氏度):260认证状态:Not Qualified
座面最大高度:1.45 mm最大供电电压:5.5 V
最小供电电压:4.5 V标称供电电压:5 V
表面贴装:YES温度等级:COMMERCIAL
端子面层:Matte Tin (Sn)端子形式:GULL WING
端子节距:0.95 mm端子位置:DUAL
处于峰值回流温度下的最长时间:40宽度:1.6 mm
Base Number Matches:1

EL6203CW 数据手册

 浏览型号EL6203CW的Datasheet PDF文件第2页 
EL6203C - Product Brief  
Laser Driver Oscillator  
Features  
General Description  
• Low power dissipation  
The EL6203C is a push-pull oscillator used to reduce laser noise. It  
uses the standard interface to existing ROM controllers. The fre-  
quency and amplitude are each set with a separate resistor connected  
to ground. The tiny package and harmonic reduction allow the part to  
be placed close to a laser with low RF emissions. An auto turn-off fea-  
ture allows it to easily be used on combo CD-RW plus DVD-ROM  
pick-ups.  
• User-selectable frequency from  
60MHz to 600MHz controlled  
with a single resistor  
• User-specified amplitude from  
10mA pk-pk to 100mA pk  
controlled with a single resistor  
• Auto turn-off threshold  
• Soft edges for reduced EMI  
• Small 5-pin SOT23 package  
One external resistor sets the oscillator frequency. Another external  
resistor sets the oscillator amplitude. If the APC current is reduced  
such that the average laser voltage drops to less than 1.1V, the output  
and oscillator are disabled, reducing power consumption to a  
minimum.  
Applications  
• DVD players  
• DVD-ROM drives  
• CD-RW drives  
• MO drives  
The current drawn by the oscillator consists of a small bias current,  
plus the peak output amplitude in the positive cycle. In the negative  
cycle the oscillator subtracts peak output amplitude from the laser  
APC current.  
• General purpose laser noise  
reduction  
This part is pin-compatible to the EL6201C. It is superior to the  
EL6201C in several ways: It has up to 100mA output capability, it is  
more power-efficient, it has less harmonic content, and it has an auto  
shut-off feature activated at 1.1V.  
Ordering Information  
The part is available in the space-saving 5-pin SOT23 package. It is  
Part No  
Package  
Tape & Reel  
Outline #  
specified for operation from -0°C to 7C.  
EL6203CW  
5-Pin SOT23  
MDP0038  
Connection Diagram  
1
2
3
VDD  
GND  
IOUT  
RFREQ  
RAMP  
5
4
5-Pin SOT23  
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these  
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.  
© 2001 Elantec Semiconductor, Inc.  

与EL6203CW相关器件

型号 品牌 描述 获取价格 数据表
EL6203CW-T13 INTERSIL Laser Driver Oscillator

获取价格

EL6203CW-T7 INTERSIL Laser Driver Oscillator

获取价格

EL6203CW-T7A INTERSIL Laser Driver Oscillator

获取价格

EL6203CWZ INTERSIL Laser Driver Oscillator

获取价格

EL6203CWZ-T7 INTERSIL Laser Driver Oscillator

获取价格

EL6203CWZ-T7A INTERSIL Laser Driver Oscillator

获取价格