RoHS
Pb
EMDS22M2H-133.333M
EMDS22 M 2 H -133.333M
Series
Nominal Frequency
RoHS Compliant (Pb-free) 2.5V 6 Pad 3.2mm x 5mm
Plastic SMD LVDS MEMS Oscillator
133.333MHz
Logic Control / Additional Output
Output Enable (OE) and Complementary Output
Frequency Tolerance/Stability
±50ppm Maximum over -20°C to +70°C
Duty Cycle
50 ±5(%)
ELECTRICAL SPECIFICATIONS
Nominal Frequency
133.333MHz
Frequency Tolerance/Stability
±50ppm Maximum over -20°C to +70°C (Inclusive of all conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change,
1st Year Aging at 25°C, Reflow, Shock, and Vibration)
Aging at 25°C
±1ppm First Year Maximum
Supply Voltage
+2.5Vdc ±0.125Vdc
Input Current
75mA Maximum (Excluding Load Termination Current)
1.425Vdc Typical
Output Voltage Logic High (Voh)
Output Voltage Logic Low (Vol)
Differential Output Voltage (Vod)
Offset Voltage (Vos)
1.075Vdc Typical
247mVdc Minimum, 350mVdc Typical, 454mVdc Maximum
1.125V Minimum, 1.250V Typical, 1.375V Maximum
225pSec Typical, 325pSec Maximum (Measured over 20% to 80% of waveform)
50mVdc Maximum
Rise/Fall Time
Differential Output Error (dVod)
Duty Cycle
50 ±5(%) (Measured at 50% of waveform)
50mVdc Maximum
Offset Error (dVos)
Load Drive Capability
Output Logic Type
100 Ohms Between Output and Complementary Output
LVDS
Logic Control / Additional Output
Output Control Input Voltage
Output Enable (OE) and Complementary Output
Vih of 70% of Vcc Minimum or No Connect to Enable Output and Complementary Output, Vil of 30% of Vcc
Maximum to Disable Output and Complementary Output (High Impedance)
Output Enable Current
Period Jitter (Deterministic)
Period Jitter (Random)
Period Jitter (RMS)
70mA Maximum (OE) Without Load
0.2pSec Typical
2.0pSec Typical
2.5pSec Typical, 3.5pSec Maximum
25pSec Typical, 30pSec Maximum
1.7pSec Typical
Period Jitter (pk-pk)
RMS Phase Jitter (Fj = 637kHz to
10MHz; Random)
RMS Phase Jitter (Fj = 1MHz to
20MHz; Random)
1.2pSec Typical
0.7pSec Typical
RMS Phase Jitter (Fj = 1.875MHz to
20MHz; Random)
Start Up Time
10mSec Maximum
-55°C to +125°C
Storage Temperature Range
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility
MIL-STD-883, Method 3015, Class 2, HBM 2000V
Flammability
UL94-V0
Mechanical Shock
MIL-STD-883, Method 2002, Condition G, 30,000G
MIL-STD-883, Method 1004
Moisture Resistance
Moisture Sensitivity Level
Resistance to Soldering Heat
Resistance to Solvents
Solderability
J-STD-020, MSL 1
MIL-STD-202, Method 210, Condition K
MIL-STD-202, Method 215
MIL-STD-883, Method 2003 (Pads on bottom of package only)
MIL-STD-883, Method 1010, Condition B
Temperature Cycling
www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 3/12/2011 | Page 1 of 5