Document 608
For Silicon Laboratories
Flyback Transformers Si3402 PD Controllers
•ꢀDesigned for Power over Ethernet PD controllers for applica-
tions up to 15 Watts.
•ꢀOperates in continuous conduction mode with 36 – 57 V input
•ꢀ 1500Vrms, one minuteisolationbetweenprimary and secondary
Core material Ferrite
Terminations RoHS tin-silver over tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight 6.57 – 6.71 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 175 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick,
28 mm pocket spacing, 12.93 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
Inductance Inductance
Leakage
DCR max (Ohms)4
Part
Power
(W)
at 0 A2
at Ipk3
inductance5 Turns ratio6 Ipk3
number1
±±0ꢀ (ꢁµ)
min (ꢁµ)
pri
sec
max (ꢁµ)
pri : sec
(A)
Output7
FA2924-AL_
FA2805-CL_
FA2925-AL_
15
15
15
40.0
40.0
40.0
36.0
36.0
36.0
0.100
0.108
0.100
0.025
0.040
0.155
0.666
0.621
0.566
1 : 0.3
1 : 0.4
1 : 1
2.0
2.0
2.0
3.3 V, 4.5 A
5.0 V, 3.0 A
12.0 V, 1.25 A
1. When ordering, please specify packaging code:
FA2925-ALD
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer
added ($25 charge), use code letter D instead.
2. Inductance is for the primary, measured at 200 kHz, 0.2 Vrms, 0 Adc.
3. Ipk is peak primary current drawn at minimum input voltage.
4. DCR for the secondary is per winding.
Dot above pin1
5. Leakage inductance measured between pins 1 and 2 with all secondary pins shorted.
6. Turns ratio is with the secondary windings connected in parallel.
7. Output is with the secondary windings connected in parallel.
8. Electrical specifications at 25°C.
0.500
12,70
max
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.004/0,10
0.039
1,00
0.699
17,75
max
0.050
1,27
0.028
0,70
0.512
13,00
7
8
0.080
2,03
0.590
14,99
2
10
1
Pri
1
Sec
0.530
13,46
Recommended
Land Pattern
max
10
9
Secondary windings to be con-
nected in parallel on PC board
5
1
0.098
2,50
0.098
2,50
6
inches
mm
Dimensions are in
Document 608 Revised 03/14/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.