Document 376
For Linear Technology
SMT Power Transformer LT1725 Flyback Controller
The A9967-AL surface mount transformer works with
with Linear Technology LT1725 Isolated Flyback Con-
troller. It is ideal for use in telecommunications isolated
converters and isolated power supplies, and can be
used in PoE applications.
For the LT1725, 48 V to 15 V converter, three windings
are connected in series for the primary and two windings
are connected in parallel for the secondary output of
15 V, 2 A. The remaining winding provides power to the
chipset.
This low-profile transformer is designed for an input
Coilcraft can also custom engineer a transformer to
meet your specific requirements. For free evaluation
samples, contact Coilcraft or visit www.coilcraft.com.
voltage of 36
– 72 Volts. It features six 1-to-1 windings
and 500 Vrms isolation between windings.
Inductance
at 0 A2
±10% (µH)
Inductance
Leakage
Part
at Ipk3
DCR max4
(Ohms)
inductance5
max (µH)
Ipk3
(A)
number1
min (µH)
Output
A9967-AL_
10.0
9.0
0.045
0.200
7.0
15 V, 2 A
1. When ordering, please specify packaging code:
2. Inductance is per winding of the primary, measured at 100 kHz,
0.1 Vrms, 0 Adc.
3. Peak primary current drawn at minimum input voltage.
4. DCR is per winding.
5. Leakage inductance is for one winding and is measured with all other
windings shorted.
6. Electrical specifications at 25°C.
A9967-ALD
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (175 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use
code letter D instead.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
1.148
max
Core material Ferrite
Weight: 11.9 g
29,15
1
max
6
12
Terminations RoHS tin-silver over tin over nickel over phos
bronze. Other terminations available at additional cost.
0.810
20,57
Ambient temperature –40°C to +85°C
A9967-AL
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
7
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
0.450
11,43
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
max
Packaging 175 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick,
28 mm pocket spacing, 12.0 mm pocket depth
0.004/0,10
0.084
2,13
0.969
24,6
PCB washing Only pure water or alcohol recommended
0.827
21,0
6
3
0.130
3,30
0.93
23,62
0.05
1,27
0.028
0,72
6
1
7
1
7
1
10
4
Recommended
Land Pattern
12
0.118
3,0
0.118
3,0
9
5
12
2
inches
mm
Dimensions are in
11
8
1:1:1:1:1:1
Specifications subject to change without notice.
Please check our website for latest information.
Document376 Revised04/20/05
© Coilcraft, Inc. 2009