1091M Series Non-Relampable LED Indicator Lights
D E S C R I P T I O N A N D F E A T U R E S
Solid-state indicator lights complete with built-in
current-limiting resistor and rectifier diode.
All dimensions
in inches.
Ø.630
Mounting: Will snap-fit into Ø.500/.505 hole in
panels .020/.100 thick. Push-on speednut SN0461
also available.
.380
Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C),lead color: red
and white, 4.40/4.80 long, stripped .430/.570
1.130
Lens: Polycarbonate
Anode(+): Red lead
Bezel: Polished stainless steel. For black finish
add "X" after the series letter(s).
Ø.500
MAX.
Housing: White Nylon
Notes: Also incorporates
LE D Solid S tate Indicator
IN4004 (400 P.I.V.) rectifier
diode.
Model No.
(6V)
1091M1-6V
1091M5-6V
1091M7-6V
Model No.
(24V)
1091M1-24V
1091M5-24V
1091M7-24V
Model No.
Model No.
(12V)
1091M1-12V
1091M5-12V
1091M7-12V
Lens Color
Red
Green
Yellow
(105-125 VAC*)
1091M1-125VAC
1091M5-125VAC
1091M7-125VAC
(2) 3.9K12/ W*
*125 VAC supplied with
6" white wire, stripped 1/2"
with external 3.9K 1/2 watt
resistor attached to one lead,
covered with shrink tubing
insulation.
Internal Resistor
(ohms)
150
390
1000
(One Internal)
Voltage Table
VAC
* Also incorporates 1N4004
(400 P.I.V.) rectifier diode.
Incorporates LED*
4304H1
Lens Color
Red
Nominal
VDC
Green
Yellow
4304H5
6V
12V
24V
3.5 to 6.5
6 to 13.5
12 to 24
5 to 11
10 to 20
22 to 32
4304H7
125 VAC
-
105 to 125
To use 24V model: Beyond 32VAC add 30 ohms per volt; beyond 24 VDC add 50 ohms per volt.
Use 1/2W resistor up to 50V; 1W resistor for 50V to 70V; 2W resistor for 75V to 125V. Do not use beyond 125V.
America:
Europe:
Asia:
CML Innovative Technologies,Inc.
147 Central Avenue
CML Technologies GmbH &Co.KG
Robert-Bunsen-Str.1
CML Innovative Technologies,Inc.
61 Aida Street
Hackensack, NJ 07601 -USA
Tel:1-201-489 -8989
Fax:1-201-489 -6911
e-mail:americas@cml-it.com
67098 Bad Dürkheim -GERMANY
Tel:+49 (0)6322 9567-0
Fax:+49 (0)6322 9567-88
e-mail:europe@cml-it.com
Singapore 459975
Tel:(65)9630 -5003
e-mail:asia@cml-it.com
CML-IT reserves the right to make specification revisions that enhance the design and/or performance of the product