3.0SMCJ SERIES
SSUURRFFAACCEE MMOOUUNNTT TTRRAANNSSIIEENNTT
VVOOLLTTAAGGEE SSUUPPPPRREESSSSOORR
CCHHEENNGG--YYII
ELECTRONIC
VOLTAGE 5.0 to 170 VOLTS
PEAK PULSE POWER 3000 WATTS
SMC/DO-214AB
.115(2.92)
.121(3.07)
FEATURES
.220(5.59)
.245(6.22)
For surface mounted applications in order to
optimize board space
Low profile package
.260(6.60)
.280(7.11)
Built-in strain relief
.006(.152)
.012(.305)
Glass passivated junction
Low inductance
.079(2.00)
.103(2.62)
Excellent clamping capability
Repetition Rate (duty cycle):0.5%
Fast response time: typically less then 5.0 ns
from 0 volts to BV for bidirectional types
Typical ID less then 1 A above 10V
.030(0.76)
.060(1.52)
.004(.102)
.008(.203)
.305(7.75)
.320(8.13)
0
High tempreature soldering:250 C/10 seconds
at terminals
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Dimensions in inches and (millimeters)
*Typical Range
MECHANICAL DATA
Case:JEDEC DO-214AB molded plastic over passivated junction
Terminals:Solder plated solderable per MIL-STD-750, Method 2026
Polarity:Color band denotes positive end (cathode) except bidirectional types
Standard Packaging: 16mm tape (EIA STD EIA-481)
Weight:0.007 ounce, 0.21 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
0
Ratings at 25 C ambient temperature unless otherwise specified.
RATINGS
SYMBOL
VALUE
UNITS
Watts
Amps
Peak Pulse Power Dissipation on 10/1000 s (NOTE 1,2,Fig.1)
Peak Pulse on Current 10/1000 s waveform (NOTE 1,Fig.3)
PPPM
Minimum 3000
See Table 1
IPPM
Peak forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)(NOTE 2,3)
Amps
IFSM
200.0
0
Operating Junction and Storage Temperature Range
TJ, TSTG
-55 to + 150
C
0
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25 C per Fig.2
2
2. Measured on 8.0mm copper pads to each terminal.
3. 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.