AMMC - 6430
25 - 33 GHz Power Amplifier
Data Sheet
ChipꢀSize:ꢀ2500ꢀxꢀ1750ꢀµmꢀ(100ꢀxꢀ69ꢀmils)
ChipꢀSizeꢀTolerance:ꢀ ꢀ10µmꢀ( 0.4ꢀmils)
ChipꢀThickness:ꢀ100ꢀ ꢀ10µmꢀ(4ꢀ ꢀ0.4ꢀmils)
PadꢀDimensions: 100ꢀxꢀ100ꢀµmꢀ(4ꢀ ꢀ0.4ꢀmils)
Features
Description
•ꢀ Wideꢀfrequencyꢀrange:ꢀ25ꢀ-ꢀ33ꢀGHz
•ꢀ Highꢀgain:ꢀ17ꢀdB
TheꢀAMMC-6430ꢀMMICꢀisꢀaꢀbroadbandꢀnearlyꢀ1Wꢀpowerꢀ
amplifierꢀdesignedꢀforꢀuseꢀinꢀtransmittersꢀthatꢀoperateꢀ
inꢀvariousꢀfrequencyꢀbandsꢀbetweenꢀ25GHzꢀandꢀ33GHz.ꢀ
ThisꢀMMICꢀoptimizedꢀforꢀlinearꢀoperationꢀwithꢀanꢀoutputꢀ
thirdꢀorderꢀinterceptꢀpointꢀ(OIP3)ꢀofꢀ37dBm.ꢀAtꢀ30GHzꢀitꢀ
providesꢀ29dBmꢀofꢀoutputꢀpowerꢀ(P-1dB)ꢀandꢀ17dBꢀofꢀ
gain.ꢀTheꢀdeviceꢀhasꢀinputꢀandꢀoutputꢀmatchingꢀcircuitryꢀ
forꢀuseꢀinꢀ50ꢀΩꢀenvironments.ꢀTheꢀAMMC-6430ꢀalsoꢀinte-
gratesꢀaꢀtemperatureꢀcompensatedꢀRFꢀpowerꢀdetectionꢀ
circuitꢀthatꢀenablesꢀpowerꢀdetectionꢀofꢀ0.3V/W.ꢀDCꢀbiasꢀisꢀ
simpleꢀandꢀtheꢀdeviceꢀoperatesꢀonꢀwidelyꢀavailableꢀ5.5Vꢀforꢀ
currentꢀsupplyꢀ(negativeꢀvoltageꢀonlyꢀneededꢀforꢀVg).ꢀItꢀisꢀ
fabricatedꢀinꢀaꢀPHEMTꢀprocessꢀforꢀexceptionalꢀpowerꢀandꢀ
gainꢀperformance.ꢀForꢀimprovedꢀreliabilityꢀandꢀmoistureꢀ
protection,ꢀtheꢀdieꢀisꢀpassivatedꢀatꢀtheꢀactiveꢀareas.
•ꢀ Power:ꢀ@30ꢀGHz,ꢀP-1dB=29ꢀdBm
•ꢀ Highlyꢀlinear:ꢀOIP3=37dBm
•ꢀ IntegratedꢀRFꢀpowerꢀdetector
•ꢀ 5.5ꢀVolt,ꢀ-0.7ꢀVolt,ꢀ900mAꢀoperation
Applications
•ꢀ MicrowaveꢀRadioꢀsystems
•ꢀ SatelliteꢀVSATꢀandꢀDBSꢀsystems
•ꢀ LMDSꢀ&ꢀPt-PtꢀmmWꢀLongꢀHaulꢀ
•ꢀ 802.16ꢀ&ꢀ802.20ꢀWiMaxꢀBWAꢀꢀ
•ꢀ WLLꢀandꢀMMDSꢀloops
•ꢀ Commercialꢀgradeꢀmilitary
•ꢀ CanꢀbeꢀdrivenꢀbyꢀAMMC-6345,ꢀincreasingludingꢀoverallꢀ
gain.
[1]
AMMC-6430 Absolute Maximum Ratings
Symbol
V ꢀ
Parameters/Conditions
PositiveꢀDrainꢀVoltage
GateꢀSupplyꢀVoltage
Units
V
Min.
Max.
7
d
V
g
V
-3
0.5
I
DrainꢀCurrent
mA
dBm
°C
1500
23
d
P
CWꢀInputꢀPower
in
T
OperatingꢀChannelꢀTemp.
StorageꢀCaseꢀTemp.
+150
+150
+300
ch
T
°C
-65
stg
T
MaximumꢀAssemblyꢀTempꢀ(60ꢀsecꢀmax)
°C
max
Note:
1.ꢀ Operationꢀinꢀexcessꢀofꢀanyꢀoneꢀofꢀtheseꢀconditionsꢀmayꢀresultꢀinꢀpermanentꢀdamageꢀtoꢀthisꢀdevice.
Note: These devices are ESD sensitive. The following precautions are strongly recommended. Ensure
that an ESD approved carrier is used when dice are transported from one destination to another.
Personal grounding is to be worn at all times when handling these devices