5秒后页面跳转
T0816 PDF预览

T0816

更新时间: 2024-01-31 08:10:48
品牌 Logo 应用领域
爱特美尔 - ATMEL 振荡器驱动器电阻器射频
页数 文件大小 规格书
14页 342K
描述
3 - CHANNEL LASER DRIVER WITH RF OSCILLATOR

T0816 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Transferred零件包装代码:SSOP
包装说明:LSSOP, SSOP16,.25针数:16
Reach Compliance Code:compliant风险等级:5.44
接口集成电路类型:INTERFACE CIRCUITJESD-30 代码:R-PDSO-G16
JESD-609代码:e3长度:4.9 mm
湿度敏感等级:2功能数量:1
端子数量:16最高工作温度:70 °C
最低工作温度:封装主体材料:PLASTIC/EPOXY
封装代码:LSSOP封装等效代码:SSOP16,.25
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
峰值回流温度(摄氏度):260电源:5 V
认证状态:Not Qualified座面最大高度:1.7 mm
子类别:Display Drivers最大供电电压:5.5 V
最小供电电压:4.5 V标称供电电压:5 V
表面贴装:YES技术:BIPOLAR
温度等级:COMMERCIAL端子面层:Matte Tin (Sn) - annealed
端子形式:GULL WING端子节距:0.635 mm
端子位置:DUAL处于峰值回流温度下的最长时间:40
Base Number Matches:1

T0816 数据手册

 浏览型号T0816的Datasheet PDF文件第2页浏览型号T0816的Datasheet PDF文件第3页浏览型号T0816的Datasheet PDF文件第4页浏览型号T0816的Datasheet PDF文件第5页浏览型号T0816的Datasheet PDF文件第6页浏览型号T0816的Datasheet PDF文件第7页 
Features  
Current-controlled Output Current Source, 3 Input Channels  
Low-power Consumption  
Output Current per Channel to 250 mA  
Total Output Current to 300 mA  
Rise Time 1.0 ns, Fall Time 1.1 ns  
On-chip RF Oscillator  
Control of Frequency and Swing by Use of 2 External Resistors  
Oscillator Frequency Range from 200 MHz to 500 MHz  
Oscillator Swing to 100 mA  
Single 5 V Power Supply  
Common Enable, Disable Input  
TTL/CMOS Control Signals  
Small SSO16 Package and QFN16 Package  
3-ChannelLaser  
Driver with RF  
Oscillator  
Applications  
CD-RW Drives  
Writable Optical Drives  
T0816  
Description  
The T0816 is a laser diode driver for the operation of a grounded laser diode for  
CD-RW drives. It includes three channels for three different optical power levels which  
are controlled by a separate IC. The read channel generates a continuous output level  
whereas channels 2 and 3 are provided as write channels with very fast switching  
speeds. Write current pulses are enabled when a ‘low’ signal is applied to the NE pins.  
All channels are summed together at the IOUT pin. Each channel can contribute up to  
250 mA to the total output current of up to 300 mA. A total gain of 100 (read channel),  
250 (channel 2) and 150 (channel 3) are provided between each reference current  
input and the output. Although the reference inputs are current inputs voltage control  
is possible by using external resistors.  
An on-chip RF oscillator is provided to reduce laser mode hopping noise during read  
mode. Frequency and swing can be set by two external resistors. Oscillation is  
enabled by a ‘high’ at the ENOSC pin. Complete output current and oscillator switch-  
off is achieved by a ‘low’ at the ENABLE input.  
Figure 1. Block Diagram  
I3  
Channel 3  
Channel 2  
NE3  
I2  
NE2  
IOUT  
IR  
NER  
Read channel  
RF oscillator  
ENABLE  
ENOSC  
RF  
RS  
Rev. 4505G–DVD–09/03  

与T0816相关器件

型号 品牌 描述 获取价格 数据表
T0816_05 ATMEL 3-channel Laser Driver with RF Oscillator

获取价格

T0816M-TCQG ATMEL 3 - CHANNEL LASER DRIVER WITH RF OSCILLATOR

获取价格

T0816-PEQG ATMEL 3 - CHANNEL LASER DRIVER WITH RF OSCILLATOR

获取价格

T0816-TCQ ATMEL 3 - CHANNEL LASER DRIVER WITH RF OSCILLATOR

获取价格

T0816-TCQG MICROCHIP Interface Circuit, PDSO16

获取价格

T0820 ATMEL 4 CHANNEL LASER DRIVER WITH RF OSCILLATOR

获取价格