5秒后页面跳转
ATA6829-T3SY PDF预览

ATA6829-T3SY

更新时间: 2024-01-31 02:41:11
品牌 Logo 应用领域
爱特美尔 - ATMEL 驱动器
页数 文件大小 规格书
16页 318K
描述
Dual Triple DMOS Output Driver with Serial Input Control

ATA6829-T3SY 技术参数

是否Rohs认证: 符合生命周期:Transferred
零件包装代码:SOIC包装说明:HLSOP,
针数:16Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:7.73内置保护:OVER CURRENT; THERMAL; UNDER VOLTAGE
接口集成电路类型:SIPO BASED PERIPHERAL DRIVERJESD-30 代码:R-PDSO-G16
长度:9.9 mm功能数量:1
端子数量:16输出电流流向:SOURCE AND SINK
封装主体材料:PLASTIC/EPOXY封装代码:HLSOP
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
认证状态:Not Qualified座面最大高度:1.62 mm
最大供电电压:5.25 V最小供电电压:4.75 V
标称供电电压:5 V电源电压1-最大:40 V
电源电压1-分钟:7.5 V表面贴装:YES
技术:BCDMOS端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
断开时间:20 µs接通时间:20 µs
Base Number Matches:1

ATA6829-T3SY 数据手册

 浏览型号ATA6829-T3SY的Datasheet PDF文件第2页浏览型号ATA6829-T3SY的Datasheet PDF文件第3页浏览型号ATA6829-T3SY的Datasheet PDF文件第4页浏览型号ATA6829-T3SY的Datasheet PDF文件第5页浏览型号ATA6829-T3SY的Datasheet PDF文件第6页浏览型号ATA6829-T3SY的Datasheet PDF文件第7页 
Features  
Supply Voltage up to 40V  
RDSon Typically 0.5at 25°C, Maximum 1.1at 150°C  
Up to 1.5A Output Current  
Three High-side and Three Low-side Drivers Usable as Single Outputs or Half Bridges  
Capable to Switch all Kinds of Loads such as DC Motors, Bulbs, Resistors, Capacitors  
and Inductors  
PWM Capability for Each Output Controlled by External PWM Signal  
No Shoot-through Current  
Dual Triple  
DMOS Output  
Driver with  
Serial Input  
Control  
Very Low Quiescent Current IS < 5 µA in Standby Mode over Total  
Temperature Range  
Outputs Short-circuit Protected  
Selective Overtemperature Protection for Each Switch and  
Overtemperature Prewarning  
Undervoltage Protection  
Various Diagnostic Functions such as Shorted Output, Open Load, Overtemperature  
and Power-supply Fail Detection  
Serial Data Interface, Daisy Chain Capable, up to 2 MHz Clock Frequency  
SO16 Power Package  
T6819/ATA6829  
1. Description  
The T6819/ATA6829 are fully protected driver interfaces designed in 0.8-µm BCD-  
MOS technology. They are used to control up to six different loads by a  
microcontroller in automotive and industrial applications.  
Each of the three high-side and three low-side drivers is capable to drive currents up  
to 1.5A. Each driver is freely configurable and can be controlled separately from a  
standard serial data interface. Therefore, all kinds of loads such as bulbs, resistors,  
capacitors and inductors can be combined. The IC design especially supports the  
applications of H-bridges to drive DC motors. The capability to control each output  
with an external PWM signal opens additional applications.  
Protection is guaranteed regarding short-circuit conditions, overtemperature and und-  
ervoltage. Various diagnostic functions and a very low quiescent current in stand-by  
mode opens a wide range of applications. Automotive qualification (protection against  
conducted interferences, EMC protection and 2-kV ESD protection) gives added value  
and enhanced quality for exacting requirements of automotive applications.  
Rev. 4531F–BCD–09/05  

与ATA6829-T3SY相关器件

型号 品牌 描述 获取价格 数据表
ATA6830 ATMEL INTELLIGENT STEPPER MOTOR DRIVER

获取价格

ATA6830_05 ATMEL INTELLIGENT STEPPER MOTOR DRIVER

获取价格

ATA6830-PKH ATMEL INTELLIGENT STEPPER MOTOR DRIVER

获取价格

ATA6830-PKHW ATMEL INTELLIGENT STEPPER MOTOR DRIVER

获取价格

ATA6830-PKQ ATMEL Stepper Motor Controller, 7 X 7 MM, MO-220, VFQFP-28

获取价格

ATA6831 ATMEL Triple Half-bridge Driver with SP and PWM

获取价格