Model PD2425N5050S2
Rev C
Ultra Low Profile 0404 Power Divider
50ꢀ to 50ꢀ
Description
The PD2425N5050S2 is a low profile 1mm square, subꢀminiature Wilkinson power
divider in an easy to use surface mount package. The PD2425N5050S2 is ideal for
high volume manufacturing and delivers higher performances than traditional printed
and lumped element solutions. The PD2425N5050S2 is matched to 50ꢁ and has a
height profile of 0.6 mm with an LGA interface which is ideal for high level
integrations in module level solutions in the following markets: WiMAX (2.3 ꢀ 2.7
GHz), 802.11b, g & n, 2.4 GHz ISM band, Bluetooth (LE), Bluetooth and ZigBee.
The PD2425N5050S2 does not include the resistive element and therefore, requires
an external resistor for operation. The PD2425N5050S2 is available on tape and
reel for high volume manufacturing pick and place.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min.
Typ.
Max
Unit
MHz
ꢀ
• 2400ꢁ2500 MHz
Frequency
2400
2500
• 23 dB Isolation (output ports)
• Good Return Loss
• 0.6 mm Height Profile
• 50ꢀ Input / 50ꢀ Outputs
• Low Insertion Loss
• Surface Mountable
• Tape & Reel
• Nonꢁconductive Surface
• RoHS Compliant
• External Resistor Required
• Halogen Free
Input Port Impedance
Output Port Impedance
Return Loss
50
50
ꢀ
21
27
dB
Insertion Loss*
0.39
0.01
0.5
23
0.46
0.35
1.3
dB
Amplitude Balance
Phase Balance
dB
Degrees
dB
Isolation (Output Ports)
Power Handling
Operating Temperature
20
0.5
Watts
ºC
ꢁ55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Top View (Nearꢁside)
Side View
Bottom View (Farꢁside)
.23
3x .27
±.05
.62
1
±.10
1.04
.33
2
.23
3x .27
±.10
.33
.50
1.04
3x .25
3
4
3x .25
.50
Pin
1
Designation
GND
Input
2
3
4
Output 1
Output 2
Dimensions are in Millimeters
Mechanical Outline
Tolerances are NonꢁCumulative
USA/Canada: (315) 432ꢀ8909
Toll Free: (800) 411ꢀ6596
Europe: +44 2392ꢀ232392
Asia: +86 512ꢀ62749282
Visit us at
www.Anaren.com