Model PD1722J5050S3
Rev A
Ultra Low Profile 0805 Power Divider
3 Way 50Ω to 50Ω
Description
The PD1722J5050S3 is a low profile, sub-miniature Wilkinson power divider in an
easy to use surface mount package and is ideal for high volume manufacturing
while delivering higher performances than traditional printed and lumped element
solutions. It has been designed for the DCS, PCS, UMTS and CDMA markets. The
PD1722J5050S3 is matched to 50 Ω and has a height profile of 0.84 mm. Three
external resistors are required for operation. Components are available on tape and
reel for high volume manufacturing pick and place.
This components is constructed from ceramic filled PTFE composites which
possess excellent electrical and mechanical stability having X and Y thermal
coefficient of expansion (CTE) of 17 ppm/oC.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min.
Typ.
Max
Unit
MHz
Ω
• 1700 – 2200 MHz
Frequency
1700
2200
• 0.84 mm Height Profile
• 50ꢀ Outputs/Inputs
• DCS/PCS/UMTS/CDMA
• External resistors required
• Low Insertion Loss
• Surface Mountable
• Tape & Reel
Input Port Impedance
Output Port Impedance
Return Loss
50
50
11
0.9
0.5
9
Ω
9
dB
Insertion Loss*
1.3
0.9
12
dB
Amplitude Balance
Phase Balance
dB
Degrees
dB
• Non-conductive Surface
• RoHS Compliant
Isolation (Output Ports)
Power Handling
Operating Temperature
14
17
1
Watts
ºC
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
.033±.002
[0.84±0.05]
1
6
2
5
3
4
Orientation
Marker Denotes
Pin Location
Orientation
Marker Denotes
Pin Location
Pin Designation
1
2
3
4
5
6
Output 1
GND
Output 2
GND
Input
Output 3
Dimensions are in Inches [Millimeters]
Mechanical Outline
Tolerances are Non-Cumulative
USA/Canada:
Toll Free:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape
and Reel for Pick and
Place Manufacturing.
Europe: